89 Stroker
Active member
04 6.0 with a later model engine in it all stock no tuner
driving down the road running fine then pulling up to a light truck had no throttle response and started running rough, shut the truck off and now wont restart
koeo shows a p2285 injector control pressure circuit low
other then that there are no codes
FICM has 48 volts while cranking
builds oil pressure while cranking also
fuel bowl on top has fuel and fills up when key is turned on
wont start with ICP unplugged
injectors click when doing a buzz test
smells like diesel fumes after cranking, it sounds like it wants to start.
rpm gauge didn't move while cranking. is there a way to test the CPS?
i have a auto enginuity ford bundle, any specific tests to try?
driving down the road running fine then pulling up to a light truck had no throttle response and started running rough, shut the truck off and now wont restart
koeo shows a p2285 injector control pressure circuit low
other then that there are no codes
FICM has 48 volts while cranking
builds oil pressure while cranking also
fuel bowl on top has fuel and fills up when key is turned on
wont start with ICP unplugged
injectors click when doing a buzz test
smells like diesel fumes after cranking, it sounds like it wants to start.
rpm gauge didn't move while cranking. is there a way to test the CPS?
i have a auto enginuity ford bundle, any specific tests to try?
Last edited: