Turbo joining procedure

[JEEPSTER401]

I have some tow powers that should be here anyday and was wondering if anyone had the procedure to join the two together. I would have had the Ford dealer do it but the service manager is a rear a hole and for what he was going to charge me I was able to get the tool for another $23 dollars delivered. Being that I don't have the turbos yet and the old ones are still on the truck I haven't really looked at how they are joined. I couldn't imagine they are that hard to get together but if there are any tips or tricks I would like to know.

 

[Diesel23]

if you do get the tool it fairly easy , you will lay both high /low pressure on a solid flat surface , or a piece of 3/4 plywood to allow for the mounting pin on the bottom of the turbo base not to make it sit funny , make sure new gasket is in between and slide both turbos together , install the tool and the bolts , the bolts and special tool work together to pull both turbos together( basically presses them together) , to make them fit properly