What turbo do I have?

[Hillbillyshakespeare]

Going to do an EBPV ******. Since this is an “early 99” E series, did it come with a bigger turbo from the factory like I have read and I need the 99.5 kit or?

Sent from my iPhone using Tapatalk

 

[ghohouston]

Early 99 van turbo. Those "lines" if you will, around the compressor housing, are only present on e99 and obs turbo's. You can also tell by the 2" intake plenums, vs the later style had 3".

 

[Hillbillyshakespeare]

Early 99 van turbo. Those "lines" if you will, around the compressor housing, are only present on e99 and obs turbo's. You can also tell by the 2" intake plenums, vs the later style had 3".

Ok, so The kit from Full Force should be suffice then. Correct? https://shop.fullforcediesel.com/ebpv-******-kit-early-99


Sent from my iPhone using Tapatalk

 

[ghohouston]

https://shop.fullforcediesel.com/early-99-non-ebpv-pedestal-700296-0007

The link you posted won't open for me. This is a e99 ****** pedestal, but shows out of stock.

 

[T_W6.7]

it won't open due to the software that thinks certain words are bad words and it automatically changes them to *****

 

[Hillbillyshakespeare]

https://shop.fullforcediesel.com/early-99-non-ebpv-pedestal-700296-0007

The link you posted won't open for me. This is a e99 ****** pedestal, but shows out of stock.

Do I not need the new exhaust housing?


Sent from my iPhone using Tapatalk

 

[ghohouston]

Do I not need the new exhaust housing?


Sent from my iPhone using Tapatalk

No. Cut out your ebpv valve, and pop 2 freeze plugs in. I think actually, if you cut the valve shaft enough, you can leave the bottom plug thats already there, and only need to get 1 freeze plug. Or it's the top one that can stay, been too lomg since I've done one.