Whats normal?

ingrahams

Member
Joined
Nov 14, 2011
Messages
630
Reaction score
0
Location
New Hampshire/Africa
Well bought a 97 F350 XL with 250k on it for plowing/spare vehicle. Truck runs great, starts right up and theres no smoke. When taking off from a stop at full throttle the engine revs up really slow then once it hit second and third it pulls pretty hard. I don't feel any slipping just curious why first gear is acting this way. Is this normal? Would a chip help? would putting a chip in a motor with 250k just destroy it? the trans is a reman with about 50k on it. Thanks
-Stew
 

Jeremysmith9902

New member
Joined
Jun 27, 2012
Messages
206
Reaction score
0
Location
Silsbee, TX
either way a chip and an exhaust would help.. i would suggest ts performance or tony wildman... both make great power and are cheap.. my 97 had a hard time keeping traction from a stand still on 33's.. with a standard..
 

Bobby@cp

New member
Joined
May 18, 2011
Messages
2,482
Reaction score
0
turbo lag LOL


Which is what it could be, its hard to say without taking a very close look at it. Yeah a chip might help but me personally I would rather make sure fuel psi is good and so is hpo psi.
 

Tom S

Moderator
Joined
May 20, 2011
Messages
3,365
Reaction score
1
If it is absolute horrible off the line that make me think of broke sprag in the convertor.
 

Tom S

Moderator
Joined
May 20, 2011
Messages
3,365
Reaction score
1
A broken sprag makes the truck feel like the anchor is out off the line then run just fine with the converter locked. You lose the torque multiplication from the converter. It is not slipping.
 

ingrahams

Member
Joined
Nov 14, 2011
Messages
630
Reaction score
0
Location
New Hampshire/Africa
makes sense, and unfortunately sounds like the problem. ordered a bts VB might go for a converter as well. what would be a good choice for something that will just be running a tune?
 

Tom S

Moderator
Joined
May 20, 2011
Messages
3,365
Reaction score
1
I suggest some quality diagnosis before you start pulling a trans.
 

JohnT24

Active member
Joined
May 23, 2013
Messages
868
Reaction score
34
Location
OXFORD CT.
Do you have a boost gauge?

How much boost are you pulling?


I would check your intake boots and also your exhaust manifolds


Sent from my iPhone using Tapatalk Pro
 

JohnT24

Active member
Joined
May 23, 2013
Messages
868
Reaction score
34
Location
OXFORD CT.
How about you stop responding to ancient threads

It doesn't matter how old a certain thread is.

If it is there, it can be commented on
Or replied to.

If you have a problem with that, I suggest you contact the moderators, and they can delete whatever thread that seems to be a bee in your bonnet


Sent from my iPhone using Tapatalk Pro
 

ToMang07

Well-known member
Joined
Jan 25, 2012
Messages
6,562
Reaction score
176
Location
Mainah!
It doesn't matter how old a certain thread is.

If it is there, it can be commented on
Or replied to.

If you have a problem with that, I suggest you contact the moderators, and they can delete whatever thread that seems to be a bee in your bonnet


Sent from my iPhone using Tapatalk Pro
Or they could just ban your useless ass.

Sent from my SM-F721U using Tapatalk
 

JohnT24

Active member
Joined
May 23, 2013
Messages
868
Reaction score
34
Location
OXFORD CT.
Or they could just ban your useless ass.

Sent from my SM-F721U using Tapatalk

Cancel culture is making its way to diesel land
Lmao

PS

Whats better,
Full force or Ultimate diesel injectors?

Im torn

Full force is highly recommended but ultimate has a great warrantee


Sent from my iPhone using Tapatalk Pro
 
Joined
Aug 12, 2011
Messages
454
Reaction score
12
Location
Parker, TX
Warranty is only good if they back it up (make sure to thoroughly read the fine print) and the company is still around if you need it, Cheers!
 

JohnT24

Active member
Joined
May 23, 2013
Messages
868
Reaction score
34
Location
OXFORD CT.
Warranty is only good if they back it up (make sure to thoroughly read the fine print) and the company is still around if you need it, Cheers!

Yeah
Good point.

A while back I bought a Hydra w/jelibuilt tunes (for stock injectors)

So I was looking at his website and it seems he carries both Brands...

Don't get me wrong I like the jelibuilt tunes it was a big improvement in power even with stock injectors

But, it was very touchy when you are first taking off
You almost have to put your foot on the throttle like it's an eggshell

It made it almost difficult to drive with a manual five speed/off the line

I went to the Hydra site and downloaded a couple of their canned tunes, and it was much better off the line and same overall power it seemed like.

I am going with 160/stock, nozzle injectors
Because I don't want a lot of smoke, and I dont have an intercooler.

Not sure what I should do about programming for the Hydra
Jelibuilt seemed pretty aggressive
Maybe I'll have to call them see if they can fine-tune a tune


Sent from my iPhone using Tapatalk Pro
 

Latest posts

Members online

No members online now.
Top