earlybroncoboy
Member
Looking for ring and pinion and possibly carrier too. 96 f350 front.
Thanks
Sent from my SCH-I535 using Tapatalk
Thanks
Sent from my SCH-I535 using Tapatalk
-
1) What are you selling?
2) What is its condition?
3) Where are you located?
4) What is your asking price?
5) Pictures/videos?
6) At least 3 days between bumping your own ad.
7) No more than 5 ads per individual at once.
8) No commercial sales.
9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.
10) No feeler ads.
11) No firearms or firearm accessories.
Wtb dana 60 3.54 gears
- Thread starter earlybroncoboy
- Start date
powerlifter405
Active member
Rock auto has them if not check auto recyclers but for the cost of a R&P set sometimes it's almost the same cost to buy the whole axle.
Sets run about 300 from a yard but a full install kit is another 200 or so and used axles are about 750. I'll probably just pay the extra and have the full swap done in half a day or so.
I'm in the same boat.
Sets run about 300 from a yard but a full install kit is another 200 or so and used axles are about 750. I'll probably just pay the extra and have the full swap done in half a day or so.
I'm in the same boat.
earlybroncoboy
Member
Yeah hoping someone has a used set laying around. Bought the axle for a ttb removal swap not buyin another whole axle for gears. Just so happens the 3.54s are the most expensive gear set lol. If it comes down to it ill put 4.11 in the rear.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
1ofakind79
New member
Check on ebay. Most guys that buy these axles for off road go to really deep gears and sell 3.54s cheap. Or on pirate 4x4. I might have a set here I pulled to install 5.13s I'll check when I get home.
earlybroncoboy
Member
That would be awsome if you did. And I have been keeping an eye out on ebay. I figured the same.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
backwoodsboy
New member
Damn man, I wish you were closer.
I have a D60 here with 3.54's that I'm looking to trade for 4.10's.
I have a D60 here with 3.54's that I'm looking to trade for 4.10's.
earlybroncoboy
Member
We could trade gear sets...
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
earlybroncoboy
Member
Carriers factory shims and all would get you pretty close.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
earlybroncoboy
Member
Bump
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
PsRumors
Active member
Call Randy's ring and pinion. When I did the D60 they had a low mileage used set for $90 that I bought.
todd31277
New member
i just bought one for a spare. dont even know what gear it has. when the rain stops i will go check. if its a 354 i will trade you.
earlybroncoboy
Member
todd31277
New member
sorry its 411
ill ask around see if anyone has a set.
ill ask around see if anyone has a set.
earlybroncoboy
Member
Thanks for looking
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
earlybroncoboy
Member
Anyone now maybe? Can't Stand 4.11s on the highway anymore.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
earlybroncoboy
Member
Just scored a set on eBay 65 bucks. !
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
