MPD Single turbo kit

SEABEE08FX4 · Sep 14, 2011

08stroker250 said:
Why? The Air Dog filters so good that it isn't really necessary. I have gone 15,000 miles on my top filter and it look spotless. The extra filtration is nice, but I don't think it's necessary.

It's just what I would do if it was mine for the piece is mind.

bigrpowr · Sep 14, 2011

i have no fuel bowl and only the airdog, no issues with filtration whatsoever. much better than the stockers.

SEABEE08FX4 · Sep 14, 2011

bigrpowr said:
i have no fuel bowl and only the airdog, no issues with filtration whatsoever. much better than the stockers.

I'm probably just more worrisome than most. A filter base and some fittings is cheap insurance.

Jeff@Spartan · Sep 14, 2011

Dzchey21 said:
FWIW jeff 40 microns is the size of a piece of dust, which is about the smallest the human eye can see, these filters go clear down to 5 microns, so you would never be able to see what is getting filtered.

I run an air dog to both of my pumps no underhood filter. All depends on how anal you are about your filters imho

The top fuel filter looks much cleaner with the Air Dog than without. That is what I am getting at.

Dzchey21 · Sep 14, 2011

08stroker250 said:
The top fuel filter looks much cleaner with the Air Dog than without. That is what I am getting at.

That you might be right factory frame filter is 15 micron, now your filter 5 micron... before the factory 5 micron filter...

Jeff@Spartan · Sep 14, 2011

I do need to swap out filters come to think of it. Getting about that time.

oneturboforme · Sep 14, 2011

Is getting rid of the fuel bowl a pretty easy DIY? I just read some article where the guys with 7.3s just hacked them off and re routed lines... Seems like it should be the same concept for our trucks..

Dzchey21 · Sep 15, 2011

not that easy unless you have a kit to do it, only because the fuel bowl used banjo fittings, i dont know how air dog is doing it.

Super08Duty · Sep 29, 2011

Thought I'd wake this thread up. My single is in progress of being installed right now. Should be complete sometime next week. Ill post pics and vids of the truck once its done.

CAT35niner · Sep 29, 2011

Sweet great to hear.

Jeff@Spartan · Sep 29, 2011

Sounds good Colt! I am sure you will give great feedback of the setup!

MINK · Sep 29, 2011

Super08Duty said:
Thought I'd wake this thread up. My single is in progress of being installed right now. Should be complete sometime next week. Ill post pics and vids of the truck once its done.

what charger?

SSpeeDEMONSS · Sep 29, 2011

MINK said:
what charger?

66 batmo.

Garrett

Super08Duty · Sep 29, 2011

Im just running the 66 for now, that is until i get more fuel. then ill either pair it up with a bigger atmo. or run the 72mm from MPD.

Super08Duty · Oct 3, 2011

Trucks done, picking it up in the morning. Ill try to post info and pics tomorrow, then vids later once i get some seat time.

nickg3130 · Oct 3, 2011

Super08Duty said:
Trucks done, picking it up in the morning. Ill try to post info and pics tomorrow, then vids later once i get some seat time.

Cant wait! i wanna jump on the single turbo bandwagon eventually.

CAT35niner · Oct 3, 2011

Sweet man cant wait to hear the feedback from ya. Keep us posted.

Jeff@Spartan · Oct 4, 2011

Super08Duty said:
Trucks done, picking it up in the morning. Ill try to post info and pics tomorrow, then vids later once i get some seat time.

So......

Mike@MPD · Oct 4, 2011

Heres craigs new setup Bullseye s475 batmowheel, 100% nozzles and II pump, the funny thing is this setup spools great with the .90 housing on it, vids to come