Search results
-
B
1997 Wont Start when hot
no sir i have not. it has 175000 on it.- Biggsw784
- Post #3
- Forum: 94-97 Tech
-
B
1997 Wont Start when hot
I have a 97 f350 and when cold it has a extended crank before starting but will start. once hot and you kill it, it will not restart. It has actually died going down the road also. I have changed the mechnical fuel pump by the fuel filter housing and also changed the cam sensor with no...- Biggsw784
- Thread
- Replies: 13
- Forum: 94-97 Tech
-
B
2003 6.0 dies then hot, no restart???
whats the best way to test the hpos on this 03?? it has the bull**** crossover intake and my fittings wont fit into the icp hole because the exhaust up pipe is right in the way?? -
B
2003 6.0 dies then hot, no restart???
koeo is 0 psi. It comes up as you crank on it. ICP when engine cold, is reading what the ICP is commanding which is between 650-700 psi. When hot the ICP is reading around 100 psi while cranking while it still is commanding 650-700 psi. Once I unplug the ICP and I crank on it, it goes to default... -
B
2003 6.0 dies then hot, no restart???
Heres the story, I have a customer bring me a 2005 F250 with a 2003 6.0 engine in it. His egr cooler failed and I drained about 3-4 gal of water out of the crankcase. He said he brought in from a trip and the next morning the truck wouldnt crank over (because of the water on the pistons). I... -
B
FICM issue
I bought a 2004 F350 not running due to the oil cooler ruptured and caused oil temp to melt the stand pipe which in turn caused the IPR to get clogged up with small particles of plastic. Anyways I replaced all that and it busted right off but I believe I am having a issue with the FICM or... -
B
2004 F250 oil cooler issue??
I am on the fence on buying a 04 f250 truck that supposably needs a engine because they ran it too hot. I do alot of work on these 6.0 but havent got a chance to really look at it myself to see if it really does need a engine. The truck was mssing a battery so I put a jump box on the other... -
B
2008 Trans issue??
I have a buddy that just had a new tranny put in his truck. Now when he puts it in reverse it doesnt move until he barely tapps the throttle and it will somewhat catch. I hooked a pressure gauge up to the trans and in reverse he has 75 psi which the suncoast kit that is in his tranny calls for... -
B
Anyone see me saving this, or do I need to sell?
Is the bumper fiberglass??- Biggsw784
- Post #42
- Forum: 6.4 Aftermarket
-
B
Fox vs Bilstien vs Pure Performance
I just put the fox on my new lift and love them. They are valving specfic and they work awesome. I highly suggest them to anyone!!- Biggsw784
- Post #12
- Forum: 6.4 Aftermarket
-
B
2008 F250 5R110 issue??
it is a job 3 truck because i told him the same thing on the solenoid until i had him give me the build date. but not to say that that isnt the problem. i also told him that it is obvious that he probably just needs traction bars on it is why it shutters when taking off and it dont in 4wd. he is... -
B
2008 F250 5R110 issue??
yea ok. i havent rode in it or anything yet but he said he was just going to order a new converter and i told him to hold off because it could be time for a whole tranny. on the shifting he just said it shifts crazy when he gets on it hard. lol -
B
2008 F250 5R110 issue??
I have a buddy that has a 08 and he said that it shutters when he takes off and all the u joints and carrier bearing are good. he said that it shifts crazy when he gets on it hard too. he also claims that it doesnt do it when he puts it in 4wd. he is running a spartan on a 275. any ideas?? could... -
B
Fresh 5R110 Tranny issue
Just had my tranny rebuilt with a rcd converter and suncoast ironpack 3 rebuild kit and after getting it back it is acting wierd into reverse. Once I put it in reverse, I have to barely hit the throttle for it to engage. Now once it goes it is perfect. Now 1st gear is doing it only sometimes...- Biggsw784
- Thread
- Replies: 0
- Forum: 6.4 Aftermarket
-
B
Mag Hytec Dana 80 Diff Cover
I am very interested. Send me pics to [email protected]. Thanks- Biggsw784
- Post #2
- Forum: Aftermarket Performance
-
B
Lift Jumping From 6" to 10"
PMF is diffently one of the best!! I also had 40 questions to ask and Trev got all the answers I needed.- Biggsw784
- Post #26
- Forum: 6.4 Aftermarket
-
B
Wastegates
lthe only reason I am installing a kit is because Nitrous Express's headquarters is here in Wichita Falls Tx and my buddy is the marketing director for them and this last weekend he was in Cali for the MPMC. While he was there he met one of the editors for "8lug" magazine and he was telling my...- Biggsw784
- Post #15
- Forum: 6.4 Aftermarket
Members online
No members online now.