6.7 GT4094 Powermax Turbo Install

dseitler

New member
Joined
Feb 2, 2014
Messages
812
Reaction score
0
Location
Royal Palm Beach, FL
Shooting for 600 HP 1200 TQ. If I can get close i"ll be happy. Should have the setup working correctly today. Boost should be about 34.


Sent from my iPhone using Tapatalk
 

stevens6.7

Member
Joined
Aug 4, 2013
Messages
573
Reaction score
0
Location
Houston
Shooting for 600 HP 1200 TQ. If I can get close i"ll be happy. Should have the setup working correctly today. Boost should be about 34.


Sent from my iPhone using Tapatalk

Those would be nice numbers! I wish I had the money for this setup! Looking forward to results on dyno and problem you are having.
 

bricewise

New member
Joined
Mar 9, 2013
Messages
937
Reaction score
0
Didn't Gfulton hit 600 with 64mm vgt? Figured there would be a little more
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
I would be willing to bet boost should be a good bit higher.
 

MorganY

New member
Joined
Oct 3, 2011
Messages
2,950
Reaction score
0
Location
college station, tx
Something isn't right. Gary has zero codes, none of which were turned off. Check your pigtails. I'll look at the codes real quick, I don't know what they are off the tip of my head.

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

dseitler

New member
Joined
Feb 2, 2014
Messages
812
Reaction score
0
Location
Royal Palm Beach, FL
The 5V reference voltage is there. With the key on not running I would think it would show barometric pressure. It shows 2psi. I don't know if that's normal. While driving the back pressure is all over the place. If I clear the code I can get 25lbs of boost and that's all. It will throw the code within a mile. Checked the connector it looks new. Pins are not bent. Put soapy water on all boost air hoses under load. Exhaust side shows not soot marks. Still looking


Sent from my iPad using Tapatalk
 

MorganY

New member
Joined
Oct 3, 2011
Messages
2,950
Reaction score
0
Location
college station, tx
The 5V reference voltage is there. With the key on not running I would think it would show barometric pressure. It shows 2psi. I don't know if that's normal. While driving the back pressure is all over the place. If I clear the code I can get 25lbs of boost and that's all. It will throw the code within a mile. Checked the connector it looks new. Pins are not bent. Put soapy water on all boost air hoses under load. Exhaust side shows not soot marks. Still looking


Sent from my iPad using Tapatalk

Do you have the ebp connector fully seated? The plug can still latch onto the locking tab without being fully seated into the connector.
 

MorganY

New member
Joined
Oct 3, 2011
Messages
2,950
Reaction score
0
Location
college station, tx
Yes the gray plug has a ledge on it and it is touching the sensor. Can't see any of the rubber seal


Sent from my iPad using Tapatalk

Pull up the EBP, BARO, and MAP Absolute PID's. EBP needs to be within 1.09psi between the BARO and MAP absolute, otherwise Ford says the EBP sensor should be replaced. Key on engine off

Don't really think that is coincidental provided it was just fine before hand. Did you bend or kink the EBP tube at all?
 
Last edited:

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Something isn't right. Gary has zero codes, none of which were turned off. Check your pigtails. I'll look at the codes real quick, I don't know what they are off the tip of my head.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Non vgt is totally different. A lot were still turned off you just didn't know it cuz they were updated in mcc when I started tuning mine. Like cac under efficient , over boost , and a few others .
 

swinky

New member
Joined
Apr 25, 2013
Messages
8,350
Reaction score
0
Location
Eastern, Nc
First Run early this morning. Not a good video. At this time it keeps throwing a P0474 code. EPS Intermittent. Rechecking connections and tightening things up right now. Good mosquito control in FL
http://www.youtube.com/watch?v=5i5TVj-egWI


Sent from my iPhone using Tapatalk

On the 441 extension road like a boss lol



Sent from my HTC One using Tapatalk
 

Latest posts

Members online

Top