Future/Current Build Plans

[extreme3807]

no chit lol. Only thing I know craig has up his sleeve is an emergency stash of jelly doughnuts for Corsilli.


I still don't get whats so secretive about doing triples...

It's not trips

Well when Craig finishes ur engine ull be in 1,000 hp 6.4 club. Seems like the club is expanding every year Shane will be in it too at some point. Definitely on my bucket list b4 I die is ride in a 1,000 6.4. Good luck I kno it's hard to be patient

Thanks man. Just looking at the builds already in this thread, makes you wonder if everyone is gonna have a 1K HP 6.4 in a year or two

 

[forcefed6.4ford]

When my 450 is retired from the field it will get turned up to retarded.

 

[6.4psd916]

Mine is currently stock besides intake tune and exhaust. Best 1/4 so far is a 12.55. I would like to be able to run the 11.90 index class. Hope to knock a tenth or two just in 60ft. Best has been a 1.75. Soon I hope for a no limit cold side pipe and 4in down pipe. Then the tow power atmosphere. I'm going to keep going on the factory studs and trans till I have the funds to fix, or stuff goes boom. No ot lately so I haven't had the funds. Just taking my time.

 

[Jeff@Spartan]

Current:
Tow Power atmosphere
No Limit stuff
Studs
EGR deleted
Built tranny
All the basics

Coming up this fall/winter:
Tow Power X atmosphere
Wastegate
New heads with springs and pushrods
Gear swap
Custom air intake

Basically preparing for a final build that'll include turning my turbo setup into High Powers and going with some extra fuel. My goal is to eventually need a cage for the truck.

Oh yeah, I've got a PMF 3-link and 1.5" traction blocks using Trevor's new bar design going on in the next week or two.

 

[Powerstroked162]

Damn. I wish i could have a built 6.4 like you guys

 

[pog]

[U]Currently have:[/U]
No Limit Intake
EGR Delete
AFE Stage II Intake
Air Dog 165
H&S Black Maxx
4'' Downpipe
4'' dp back exhaust
Pro Comp traction Bars

VERY soon adding:
Elite Tow Power Turbos
Elite Z-max Ported Intake ManifoldElite Wastegate kit with welded downpipe
Elite Custom Up pipes For Steed Speed Manifolds
Steed Speed Manifolds
Soot Powered Performance ported heads
ARP Headstuds

Possibly adding duel fuelers and 60hp nozzles

im guessing your on the same boat as i am for the soot powered manifold?

 

[08BIGRIG]

im guessing your on the same boat as i am for the soot powered manifold?

http://www.youtube.com/watch?v=x6owgB_2Y2k

 

[pog]

LOL. but yeah ****ty situation

 

[switchmode]

Elite Max Powers
Elite Dual Fuelers
Elite 110 HP Nozzles
Studs/Valve Springs/Pushrods
Built Trans

 

[Dzchey21]

Just making what I have work better


And maybe a gt55 lol

Sent from my DROID BIONIC using Tapatalk 2

 

[madman1234509]

Current is nothing special:
Arp studs
Spartan
4" dp
5" exhaust
custom cac pipe/elbow
RCD converter
Comp trans kit/ HD input shaft
50mm waste gate
RCD cam and valve springs...
trac bars

Over the next 12 months....
gt3788R (63.5mm inducer)
Gt4718R (87.8mm inducer)
ported and coated 6.0 manifolds
custom up pipes
possibly a 2nd waste gate to gate total boost
dual fuelers
100% nozzles
custom lpfp system w/ a 5 gal fuel cell and walbro pumps, deleted fuel bowl
custom tuning from an undecided vendor.... would like RCD if they are on the DashDaq by then.

 

[powerstrokin15]

studs and what not now..

sometime in the future:
In house 66mm single setup
warren 30's
airdog
6.0 manifolds
soot powered intake mani
Warren trans

thennnn the goal is
adding an s475 or 480
warren 100 nozzles
like to try the CP3&K16 setup..
upipes
etc etc

tuning by Eric and Matt as they are right now..

it could all change before then though LOL def gonna be a single 66 sometime soon

 

[Erikclaw]

Ok, Tripples

Putting a 98mm in front of the High Powers.
Carrillo rods
Elite stage 1.5 cam
150hp sticks
Elite dual fuel
possibly cryoing parts

 

[08BIGRIG]

Ok, Tripples

Putting a 98mm in front of the High Powers.
Carrillo rods
Elite stage 1.5 cam
150hp sticks
Elite dual fuel
possibly cryoing parts

I am LIKING this already. Badass man. Sounds freaken sick.

 

[Erikclaw]

I am praying it works out. Should be a little guy compared to Godzilla, but I am not aiming for that kind of output. Wanting low egt's, more power and tow like a beast.

 

[Danny26]

I am praying it works out. Should be a little guy compared to Godzilla, but I am not aiming for that kind of output. Wanting low egt's, more power and tow like a beast.

Wuts the HP goal? Got to see your truck in person a few weeks ago and it looked awesome!

 

[Beans71086]

Intake, spartan tuner, exhaust, and suncoast tranny now....

In sept its getting....

Studs
Egr delete
4in Downpipe
Rudy's cold side pipe
LP fuel system upgrade (if $ permits)
Dualing batmowheels

In the future...

Ported intake
60 nozzles
71mm atmo
Innovative tuning

I feel like a minno swimming in the ocean with all these big builds planned. LOL

 

[Powersmoker]

Cummins swap


Sent from my iPhone 4S using Tapatalk 7

 

[Crack85]

Cummins swap


Sent from my iPhone 4S using Tapatalk 7

LOL :hammer:

 

[Erikclaw]

Wuts the HP goal? Got to see your truck in person a few weeks ago and it looked awesome!

Thanks, none to be honest, will do around 1k I bet but will up to how hard we push it.