Help help help codes no power please

BFT · May 4, 2014

I wonder if your intake manifold was torqued down correctly? Have you checked your oil?

TXlineman83 · May 4, 2014

Oil seems fine. What would I be looking for

BFT · May 4, 2014

Just incase your not leaking fuel from an injector line or what not.

I'm wondering if they torqued down the intake manifold properly or sealed the caps.

TXlineman83 · May 4, 2014

BFT said:
Just incase your not leaking fuel from an injector line or what not.

I'm wondering if they torqued down the intake manifold properly or sealed the caps.

I'm not sure if they said 25 or 125 or hell idk. I'll see if I can look

Csilva187 · May 4, 2014

Everything is hooked up? Man. No hissing no odd noises?

TXlineman83 · May 4, 2014

http://youtu.be/O3mxbgs33MU

Full throttle attempt boosted in drive pedal to floor

TXlineman83 · May 4, 2014

Everything seems to be connected that I can see from the top side of the cab. Removed degas. Checked all connections below it. Checked grounds too

boggerr · May 4, 2014

sounds like mine when it went into limp mode. Make sure your oil isn't over filled. Try to scan the truck with it running, my SCT didn't pull some codes unless it was running.

I'm going to guess something isn't hooked up, they missed a plug somewhere.

TXlineman83 · May 4, 2014

boggerr said:
sounds like mine when it went into limp mode. Make sure your oil isn't over filled. Try to scan the truck with it running, my SCT didn't pull some codes unless it was running.

I'm going to guess something isn't hooked up, they missed a plug somewhere.

I'm gonna keep looking. I've pulled codes while it was running. Nothing different

TXlineman83 · May 4, 2014

Only code on Edge CTS is P0000

BFT · May 4, 2014

Did you say you can monitor fuel rail pressure?

6.4strokin · May 4, 2014

Dang man I hope you can get this figured out. Its not your fault, don't blame yourself for this. I know its frustrating since you just spent money on it and it aint running right.

TXlineman83 · May 4, 2014

BFT said:
Did you say you can monitor fuel rail pressure?

Yes. About to upload another video of 0-80 full throttle with edge CTS

TXlineman83 · May 4, 2014

http://youtu.be/upx652H1poE

0-80 full throttle gearhead race tune. No power brake

BFT · May 4, 2014

Looks like you have no rail pressure. Might be your fuel rail pressure sensor

TXlineman83 · May 4, 2014

BFT said:
Looks like you have no rail pressure. Might be your fuel rail pressure sensor

Where's the fuel rail pressure sensor located

BFT · May 4, 2014

Under the passenger side valve cover on the fuel rail. Sensor should be like $30-40 I believe and can be done cab on

TXlineman83 · May 4, 2014

BFT said:
Under the passenger side valve cover on the fuel rail. Sensor should be like $30-40 I believe and can be done cab on

Ok. I guess turbos have to come off to access it

BFT · May 4, 2014

TXlineman83 said:
Ok. I guess turbos have to come off to access it

No, just intake and oil fill

Your KPA was at 5.1 before you got on it is the reason I think this. I would have one just incase, maybe it's just loose.

TXlineman83 · May 4, 2014

BFT said:
No, just intake and oil fill

Your KPA was at 5.1 before you got on it is the reason I think this. I would have one just incase, maybe it's just loose.

Ok. So just my CAI and Oil filler. Pull valve cover. Are the gaskets on valve cover reusable.