$400 motor goes 80k...

CSIPSD · Feb 20, 2013

2000wa250 said:
Nice. Which improvements? Only asking because I have the diesel site one

Sent from my DROID BIONIC using Tapatalk 2

Dont know yet... Once its installed I'll know if its an improvement. I'll shoot you a PM later today.

CSIPSD · Feb 21, 2013

Well after 230k the Dieselsite boots I have are wore out. The plenum one's are just plain shot...

So I got a box from Clay today!

http://www.riffraffdiesel.com/mm5/m...oduct_Code=RDPABK&Category_Code=F731-RDP-BOOT

These should last just as long!

TyCorr · Feb 21, 2013

Nice! I need a set when I order the welded squirters. A stock l99-03 you just order a.set correct? No need to.piece.together.

CSIPSD · Feb 21, 2013

TyCorr said:
Nice! I need a set when I order the welded squirters. A stock l99-03 you just order a.set correct? No need to.piece.together.

Just need to know what size IC you have. Some are 3.25".

TyCorr · Feb 21, 2013

I did NOT know there were variations in ICs. Good to know. Did you receive clamps too? Those boots look thick.

CSIPSD · Feb 21, 2013

No clamps, but I didnt order any. I have lots of T-clamps!

TyCorr · Feb 21, 2013

Roger that! I am usually impressed with his value in products.

lincolnlocker · Feb 21, 2013

CSIPSD said:
Just need to know what size IC you have. Some are 3.25".

i knew there are different sizes, but any idea what years are different? both of mine have 3.25"....

live life full throttle

CSIPSD · Feb 21, 2013

Hit and miss... No set in stone deal.

dentexpowerstroke · Feb 22, 2013

lincolnlocker said:
i knew there are different sizes, but any idea what years are different? both of mine have 3.25"....

live life full throttle

I was wondering that too, mine are both 3.25 also.

moose99psd · Feb 22, 2013

Looks like theres some motor assembling gremlins running amook!

from my butt

moose99psd · Feb 23, 2013

Well here we go!
from my butt

DEEZUZ · Feb 23, 2013

closer pic of how the lift is attached to the engine please What brand of lift is that also?

02pstroke · Feb 23, 2013

Cool project. What kind of temps u workin in? Engine looks great

moose99psd · Feb 23, 2013

Well its in. Its been in for a while but we had to run to town.. hoping for it to be running tonight. Weather is about 40-45 with wind so its far from nice out

from my butt

David N · Feb 24, 2013

Does that truck have a body lift? I swear when I took my motor out a few days ago, I had nowhere near that amount of vertical room.

Arisley · Feb 24, 2013

Is it running yet? Come on slow pokes.

CSIPSD · Feb 24, 2013

David N said:
Does that truck have a body lift? I swear when I took my motor out a few days ago, I had nowhere near that amount of vertical room.

No body lift... no turbo yet so...

Arisley said:
Is it running yet? Come on slow pokes.

It got cold as soon as the sun set. Have archery shoot this morning then finish up this afternoon.

Tom S · Feb 24, 2013

2000wa250 said:
Hmm....rip off of diesel sites deal? Or improvement....

Sent from my DROID BIONIC using Tapatalk 2

I would be kinda disappointed if that was copied, that seemed like an original idea. I would have just as soon had one without any ports on it but no big deal.