Search results
-
450 performance issues
Fuel pressure wasn’t it. Have 55 at idle now and 50 under load. Swapped cam sensors for the hell of it, no change, same with idm. Sent from my iPhone using Tapatalk -
450 performance issues
Map sensor and hose are good, no leaks and reading correctly Sent from my iPhone using Tapatalk -
450 performance issues
Fresh oil change with the injectors. So all of 10 miles, and maybe an hour of driving/testing Sent from my iPhone using Tapatalk -
450 performance issues
Yes oe sensor Sent from my iPhone using Tapatalk -
450 performance issues
No, planning on doing pump and regulator though. The way this one’s going I know if I sell him one it’s gonna be the other. Sent from my iPhone using Tapatalk -
450 performance issues
Man, it’s been dead in here lately. Let me throw a goofy one at some of you guys, hopefully someone has a thought. 01 f450 pretty much stock Truck had come to me a few months back, put up pipes, pedestal, and a hydra on it. Php didn’t have the pcm code for their box tunes, so I found a... -
Tuning 101 - Thread Merged with Injector Posts
We run a pcs in our race truck, as we’re running a 4R behind a 6.0. It is standalone, has a ton of inputs/outputs, can switch tunes, run data logging, all sorts of fun shit. You are the tuner for it, if it doesn’t do what you told it to do, chances are you didn’t tell it correctly. Hell, we...- 6.0 Tech
- Post #1,180
- Forum: 7.3 Aftermarket
-
2003 6.0 code P2285
Can’t edit the post for some reason, I do not have a pin out available right now, should be fairly easy to find online. Also make sure the wires are spliced to the correct pins at the sensor. I’ve done that several times when I’ve been in a hurry Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #5
- Forum: 6.0 Tech & FAQ
-
2003 6.0 code P2285
If it’s 0v koeo, you need to start chasing wiring. One should have 5v, the other 2 should have continuity to the pcm. One will be signal return, which is internal pcm ground, the other is signal, which is basically where the resistance of the sensor is at at the given pressure. Other question...- 6.0 Tech
- Post #4
- Forum: 6.0 Tech & FAQ
-
2003 6.0 code P2285
What is icp voltage key on engine off? Should be .23. 03 sensors are notorious for leaking and shorting the pins in the pigtail with oil, or seeping up the insulation and damaging the wires further up Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #2
- Forum: 6.0 Tech & FAQ
-
New torque converter locking up in Reverse and 1st gear
Is the fluid full? Do you have a manual lockup switch installed? Sent from my iPhone using Tapatalk -
No Start help
How long has it ran since doing all the oil system work? What is rpm and sync? Sent from my iPhone using Tapatalk -
Compound Turbocharged 6.0L Powerstroke Engine
I don’t, I’ll see if I can’t find someone who does have them and get them for you Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #7
- Forum: Ford Power Stroke News
-
Compound Turbocharged 6.0L Powerstroke Engine
Yeah we were working with Odawg’s diesel to get a 7.3 compound kit setup for sale, not sure whatever happened to it, but I did get one installed in one of our test rucks. Think we made close to 700 to the tire with it on fuel. Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #4
- Forum: Ford Power Stroke News
-
2003 6.0 rough and high idle
The p0046 is for the vgt actuator, the 67x codes are glow plugs. Seems like there’s a lot of shit going on here. Check the harness where it runs under the turbo. Could be chafed there and have broken wires. Your first post said you replaced the harness, correct? Did you replace it with a new...- 6.0 Tech
- Post #12
- Forum: Newly Enlisted
-
2003 6.0 rough and high idle
Is it kinda fuel knocky and real rough? Check your eot sensor. I’ve had quite a few that had broken lock tabs on them, and while I was doing a turbo or something it comes unplugged and runs terrible. Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #4
- Forum: Newly Enlisted
-
auxiliary water pump
An, ok. The pump should just have 2 or 3 bolts that hold it to the lower fan shroud. Disconnect the hoses from it, yank it out. If you’re ditching the radiator for it too, that’s 1 bolt, and lift it up, it’ll slide out of the trans cooler or condenser bracket it’s slid into. Then pull the hoses...- 6.0 Tech
- Post #5
- Forum: 6.4 Tech & FAQ
-
auxiliary water pump
Why? Common rail systems develop a shit load of heat in the fuel, and need to be cooled somehow. Did you relocate the cooler or something? Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #3
- Forum: 6.4 Tech & FAQ
-
04 ex w/low hpop pressure
I’ve got a theory this has to do with just the kits. Seems I’ve had better luck installing individual stand pipes and dummy tubes rather than the kit. Granted the kit is like 1/3-1/2 the price of doing them individually, but for the lack of headache someone can eat the cost. Hell I had the... -
Need a stage 1 5R
I’d recommend either warren or twisted. Personally have a twisted in my truck, and like it. Haven’t run a warren, but heard very good things. Sent from my iPhone using Tapatalk- 6.0 Tech
- Post #3
- Forum: 6.0 Aftermarket
Members online
No members online now.