Search results

  1. S

    I’m lost…

    This may sound silly but is the charging system all working correctly? Buddy had put a high amp alternator on, upgraded hot and ground wires along with it. On the hot wire they recommend a 200A fuse in line. Well we must have touched something because we half burnt out the fuse, took a bit to...
  2. S

    Thank you all!!

    Just ordered the hydra/jeli combo. Thanks for the info.
  3. S

    Thank you all!!

    Doing a 7.3L build at the moment, pretty much a complete resto. Weve got a CTS edge juicy bits etc. Think its worth hanging onto that for a fresh build or would the hydra/jeli combo really be a world of difference? Its an F450 work truck so not looking to set any HP records. Just need good and...
  4. S

    2023 HO 6.7 500HP 1200FTLB

    I believe this has been a problem for awhile on 6.7L bigger tunes. Those patriotic programmed ones had quite a few instances if im not mistaken.
  5. S

    Thank you all!!

    Thats great to hear. And recommendations on the 8-10? Or even for our oil fired brothers? Does Proven do decent for those gens too? Thanks for your response btw.
  6. S

    Thank you all!!

    How is Proven doing? People generally happy with them? For all models or only the later models?
  7. S

    Icon or Carli

    For what its worth, i love my PMF traction bars. Great quality and prices.
  8. S

    Need a new trans, looking for recommendations

    Very well could be innacurate, just going off their website. Open to hearing any thoughts or experiences though
  9. S

    Need a new trans, looking for recommendations

    Their website claims installations have been made up to 2000hp and towing up to 25k gcvw. For our trucks more specifically it seems they encourage performance mods and their unit, claiming it helps make the most of them. However double overdrive should not be used loaded or towing? Confusing to...
  10. S

    Question on uneven tread wear

    Question. What PSI did Nitto recommend? Front, Rear?
  11. S

    Question on uneven tread wear

    I would agree with replacing all 4 ball joints. Not replacing worn joints risks harming the hard parts the joints bolt to. Hence my buddies truck ripping through lower drag link joints, due to the sterring knuckle hole getting oblonged from running a bad joint too long. $900 later for just the...
  12. S

    Need a new trans, looking for recommendations

    I have a Warren full billet trans on my 2010 F250 with 775hp. Daily driver with about 60k miles complete build. Trans went in about 50k ago and been solid. Upgraded to the deep pan as well to help temps. Currently restoring a 99 F450 7.3 auto and will likely be putting a Warren. Considering a...
  13. S

    Dyno Tune

    You know its funny you mention TPS, i think that would be a great candidate to use. I believe it has three sensors within the assembly and they cross reference one another to verify accuracy. I believe two go from 0-5V, parallel with one another and the last one goes from 5V-0. I did a little...
  14. S

    Dyno Tune

    Ive also heard people attempt to perfect this setup with a black box of sorts. Something independent of the factory computer. For example, using RPM or Load% to directly or inversely control the cp3. Such operations could be compared to a microprocessor. If im not mistaken the cp3 on my truck...
  15. S

    Dyno Tune

    Hey guys, sorry i didnt respond sooner. The dual fueler kit is through the vendor you mentioned. I have asked who they recommend for dialing it in and there is no response via email, ill need to call. But i believe they avoided this question in the past to some extent. What i do remember is...
  16. S

    Dyno Tune

    Thank you for the reply. There was no negative tone but it was nice of you to address it up front. I have actually read/replied and followed that thread you mentioned. It really has been informative and part of the driving factor in me wanting custom calibrations. I have actually reached out to...
  17. S

    Dyno Tune

    Feel free to DM. Any help at all is greatly appreciated. Truck currently sits at 775HP and 1500 ft lbs of torque but really need to dial it in.
  18. S

    Exhaust popping noise

    I think i see three cracked, but could be wrong.
  19. S

    Dyno Tune

    Looking to dyno tune a 2010 6.4L "race truck". Does have a K16/CP3 setup that most are not confident with. Let me know if you have a lead on someone who is. Thanks
  20. S

    HPOP Pump Failure

    Adrenaline pump from Dieselsite is the way to go. We actually did have one let go almost immediately after installing. But they covered the replacement at no charge. Worked fine ever since, 30k, 4 years and 1500 hours or so. Truck is mainly for plowing.

Random media

IMG_6926_1_
image129
Buster the wayward Boxer :)
20220319_092534.jpg
P2230001
51
13_white_headlights_2
phone_pics_065
1511MG-3041
IMG_2091
pistons
pipes

Latest posts

Members online

Total: 281 (members: 1, guests: 280)
Top