Search results
-
Rebuilding engine wiring harness
I have heard many times about things not being able to be rebuilt. My Dad tought me something many, many years ago. If it was built by man, another man can tear it up, and yet another man can rebuild it. -
HPOP Rez draining
Air in the system. You introduced air into it when you disconnected the hoses and pumps. It will work itself out. -
HPOP Rez draining
Barnbuilder needs a wastegate eclip. http://powerstrokearmy.com/forums/showthread.php?t=83127 -
Bent push rods
A piece of a mirror or a thick piece of glass is a good thing to test the push rods out on. You can usually trust that a mirror is good and flat. -
How to tell if a shop really did a compression check?
I would not even let them put it back together, I would show up with a tow truck and pick it and your parts up.- Arisley
- Post #28
- Forum: 7.3 Aftermarket
-
Oil Change intervals
Short trips where the motor does not get up to operating temp will wear out the oil faster than anything else. Letting it get up to temp lets the detergents and additives in the oil clean it all out. Also believe i or not, condensation will get a small amount of water in the oil. Getting the... -
-
-
-
Chip identification
I agree on both point's Thuggy. Long time no see.- Arisley
- Post #4
- Forum: 7.3 Aftermarket
-
Fan clutch
Sounds like the fan clutch is going out. Not to expensive and pretty easy to replace. -
2000 F350 ccdrw 4x4 lariat
If I was closer to you, I would do the engine swap for you. Wish i was close enough to help out Jake. -
2000 F350 ccdrw 4x4 lariat
100 bucks and a bottle of Maker's Mark. Will double the offer if you deliver. -
-
Rough Idle and Shake
Possibly a bad UVCH, but I am going with bad injector also. -
-
cps 10mm bracket bolt
Correct the fan is NOT reverse threaded. Counter clockwise will loosen it. Put the wrench on the nut sticking straight up. Hit it with a BAH (Big Ass Hammer). Leave the belt on. It will break loose. -
cps 10mm bracket bolt
Take the bolt to the store where you buy the helicoil kit at. They will be able to tell you the size. -
Time for a fuel bowl ******?
It would have been a whole bunch of pics. It was all home built in my driveway. Hand bent tubing. Compression fittings or double flared fittings. Used brake line for the metal fuel lines, fittings all came from Home Depot. Fuel splitter line was a hunk of aluminum with some holes drilled in...
