Search results

  1. A

    To CCV mod or not to CCV mod, that is the question

    I had something similar on a streetcar, got chocolate milk in the top end of my car. It had exhaust. Everyone said it wouldn't work unless it was in the header and no mufflers. That being said on my truck it goes to the atmosphere and would rather it be in the exhaust. After water in my oil...
  2. A

    MPD 6.7L INTERCOOLER PIPE FIX

    Black pipe, all boots and clamps, less than 1000 miles. Went to MW pipe kit and replaced everything. $200. Located in Houston.
  3. A

    Midwest pipe install question

    Polished the pipes, need to polish the intake too.
  4. A

    Midwest pipe install question

    There were two plugs with the hardware. The sensor in the CAC pipe I took off was a push in with a set screw. Is there a screw in temp sensor that will plug into the harness?
  5. A

    Midwest pipe install question

    On what I think is the CAC pipe there are two bungs. What goes in there, is it a factory sensor? If not what do I need to plug them so I can install tomorrow? I polished them today and am done messing with it.
  6. A

    S&B for 6.7

    Alaska guy didn't want it.
  7. A

    S&B for 6.7

    S&B Intake for 11-16 6.7L # 75-5053,Filter Media-Oiled. Has less than 500 miles on it. $200. Located in Houston, prefer local, going to Fredericksburg this weekend, and next weekend oakgrove, LA via 10 and 165, can meet along the way. I have one e guy in Alaska that has asked about it, sent...
  8. A

    Your thoughts on cold air filter

    Wearing it our sounds like a good reason to upgrade. I doubt street driven you'll have issues with a quality one, unless you drive in extremely dusty conditions; and even the a stock box might have the same problems at some point.
  9. A

    Thanks PSE

    Recently had a streetmax, some removal, CCV kit, exhaust, and mpd intercooler pipe installed. Very happy with the service. Work was done on time, and they stayed after the shop closed to wait for me to pickup. I plan on using them for all my future needs.
  10. A

    using factory EGT after weight loss?

    Works, or seems accurate. Thanks for the help.
  11. A

    using factory EGT after weight loss?

    I'll give it a shot. I saw egrt in forscan appeared to fluctuate with load. I was actually just searching on Google for an equation.
  12. A

    using factory EGT after weight loss?

    Recently lost some weight. Prior to used Torque and ODBII Bluetooth. Everything worked fine reading PIDs. After the weight loss, I rerouted the EGT 4 plug (the furthest one aft) to the block off plate and a thermocouple from the ***. I am reading steady 32 on EGT1, 572 steady on EGT 2,3, & 4...
  13. A

    Fox Shocks vs OEM. Are they worth it?

    Thanks for the video. I wonder if the peaks where the stock shock was the same or slightly better was bump stop engagement. I have a stock ride height, can't go higher due to parking garage and was looking for something to lessen the teeth rattle. These seem to be worth the cost, I also need...
  14. A

    Stock 18's with 275/70/18 Michelins

    How much for just the tires?
  15. A

    Need Cold Air Intake 6.7

    Where you at? I have and S&B that might have 100 miles on it and was thinking about going to a NL2. I am in Houston.
  16. A

    Texas

    Grew up in Alvin, in Clearlake now. Moved back to TX last summer, so great to be home. I got a 2016 ccsb xlt fx4 in November. Added a pinoeer with cameras, LEDs, S&B, DP 75 tube, bed liner, seat covers, weather techs, and wireless airbags. Should be dropping it off at PSE for a turbo and...
  17. A

    Contact info

    Dorian replied today.
  18. A

    All you guys up here in the North Dallas area better get your Trucks ready for State

    Not sure how old the guy you quoted is, but 40s might be a kid to him. I know I call early 30s kids. That being said, it sounds like your source heard it in a class. We appreciate it being passed. I'd say until it is official there isn't anything to worry about. The speed of the government...
  19. A

    New from Houston

    Thanks all. Glad to have found this place.
  20. A

    Contact info

    Have some questions for them, anyone know a contact email? I sent an email to the tech address listed on thier site last week no reply. I'd call but out of the country for another month.

Random media

east_coast_hair
2008 6.4L pic14
Mirror plug
Big_Red10
image102
DSCN3559
image103
Downpipe
20220319_092643.jpg
PRIUS TIME SLIP
DSCN8404
IMG_0058

Latest posts

Members online

No members online now.
Total: 549 (members: 0, guests: 549)
Top