1900 PW too much?

[Swsignal5]

My mini max told me that my peak pw was 1950 yesterday when I went WOT from a dead stop. Is this too much?

 

[Randy_270]

Watch your rail pressure, if it's not dropping then you're good. I'm gonna guess that unless you're running dual fuellers, it's gonna be dropping your rail pressure.

 

[Codydiesel]

It's just a spike in pw I have seen it's go 2100 on the peak , usually when I have loss of traction then it goes beck down to 1440.

 

[Morgan@Midwest Diesel & Auto]

Yeah, your probably not holding that. You need to see what it levels out at. Lots of tunes have a bigger pw at different areas through the graph but will level out at a lower number when at wot and full RP.


Sent from my iPhone using Tapatalk

 

[Swsignal5]

Yeah, your probably not holding that. You need to see what it levels out at. Lots of tunes have a bigger pw at different areas through the graph but will level out at a lower number when at wot and full RP.


Sent from my iPhone using Tapatalk

I was watching my rail pressure and I saw it maintain 28-29k I has my programmer set on Ipw and I just saw that as my peak but I didn't see how long it stayed like that. Just curious if that was normal. I upgraded my h&s for the first time since 2012 and Thats when I'm seeing this. It's just box performance tunes

 

[Vq2fast4u]

Anyone running more than h&s pw? I ramped up the last portion of the pw table by 150. It maintains rail pressure around town. I havent been able to do any long pulls in 4th or 5th gear though.