2005 ford f350 no power

[fordpowerstroke2]

*Icp unplugged

Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

is this
good to have the icp location filled with oil?


Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

Srry I meant oil on wires and connection

Sent from my SM-G360V using Tapatalk

 

[DieselMater86]

No that's a good sign to show its bad need to replace sensor and pigtail.

 

[03_PSD]

That oil cap doesn't look OEM, I would check that.

 

[fordpowerstroke2]

Ok thanks


Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

Which brand makes the best tuner for fuel economy and power. I was thinking an SCT tuner

Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

The icp sensor still didn't fix it but it helped a little in still getting code p0267 cylinder 3 injector circuit low, and a new code cylinder 3 contribution/balance. Also p0098 intake air sensor 2 circuit high output. I need to get this fixed and I have no more ideas of what it could be

Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

I'm thinking I may have a bad injector.

Sent from my SM-G360V using Tapatalk

 

[6.0 Tech]

Bad injector most likely, and the iat 2 which is by the fuel filter bowl may have gotten unplugged or a broken wire. Havent seen many iat2 sensors go baf.

 

[fordpowerstroke2]

Ok thanks hopefully this will fix it finally.

Sent from my SM-G360V using Tapatalk

 

[fordpowerstroke2]

I fixed #3 injector and it fixed it

Sent from my SM-G360V using Tapatalk