20x10" -24mm wheels and lifts

[SD6.7]

I'm looking for help, words of wisdom and/or photos of 6.7 trucks running 20x10 wheels with -24mm offset lifted or not.
I have weld wheels that I would like to put on with 35" or 37" tires. Also with the lifts please let me know what lift you are running.

Thanks for your help

 

[hopefulHP]

. 20 x10 - 24 offset leveled with minor trimming to wheel well liners

Sent from my HTC6500LVW using Tapatalk

 

[RedRice589]

Ok here's mine. Factory height and a good bit of rubbing. Those are 20x10 with -24 offset and 35's

Leveling kit factory rear block 1 7/8

Leveling kit and 3 inch block

And the wheel poke

 

[hopefulHP]

Ok here's mine. Factory height and a good bit of rubbing. Those are 20x10 with -24 offset and 35's

Leveling kit factory rear block 1 7/8

Leveling kit and 3 inch block

And the wheel poke

Is your truck a f250? Mine sits way higher but it's a 350 it doesn't rub at all unless it's flexing at full lock


Sent from my HTC6500LVW using Tapatalk

 

[SD6.7]

Thanks for the pics. I didn't want to sell my rims, I knew the tires would stick out a bit vs the older SD models.

With the leveling kit I see there was some minor trimming. I wonder if a 4.5" lift would still require minor trimming for 35's or 37's

Thanks again for the pics


Sent from my iPad using Tapatalk

 

[TripleE44]

Mine rubbed just a little bit on the bumper bracket in the front of the wheel well(just required loosening it and moving it up a little and re-tightening it), and just a hair on the fender liner on the back of the wheel well.

3.5'' lift with 35s:

 

[SD6.7]

Mine rubbed just a little bit on the bumper bracket in the front of the wheel well(just required loosening it and moving it up a little and re-tightening it), and just a hair on the fender liner on the back of the wheel well.

3.5'' lift with 35s:

Nice looking rig. Who did your headlights?


Sent from my iPad using Tapatalk

 

[TripleE44]

Thanks man. JD with absolute performance did the lights.

 

[jdgleason]

Thanks man. JD with absolute performance did the lights.

Lookin exceptionally clean as always Eric.


Sent from my iPhone using Tapatalk

 

[SD6.7]

Sent pm JD


Sent from my iPad using Tapatalk

 

[RedRice589]

Is your truck a f250? Mine sits way higher but it's a 350 it doesn't rub at all unless it's flexing at full lock


Sent from my HTC6500LVW using Tapatalk

250 and it didn't rub unless I flexed hard full lock.

 

[RedRice589]

Thanks for the pics. I didn't want to sell my rims, I knew the tires would stick out a bit vs the older SD models.

With the leveling kit I see there was some minor trimming. I wonder if a 4.5" lift would still require minor trimming for 35's or 37's

Thanks again for the pics


Sent from my iPad using Tapatalk

No trimming with a 2.5 just move the bumper slightly.

 

[RedRice589]

Thanks man. JD with absolute performance did the lights.

Can you not post pics thanks:biggun: makes mine look crappy!! Haha lookin good man!

 

[WHY NOT]

Here ya go, 20x10 welds with 35x13.50 tires on a 2.5" leveling kit. I had to trim just a tiny bit of the pinch weld and some of the inner fender, they clear the front bumper just fine. It was a small enough amount of trimming that I used a dremmel tool. Don't sell your wheels a 10 wide is great size rim for these trucks

 

[Dzchey21]

20x10 leveled with 305/55/20

 

[Buck1]

Here ya go, 20x10 welds with 35x13.50 tires on a 2.5" leveling kit. I had to trim just a tiny bit of the pinch weld and some of the inner fender, they clear the front bumper just fine. It was a small enough amount of trimming that I used a dremmel tool. Don't sell your wheels a 10 wide is great size rim for these trucks

Very sharp truck!

Sent from my SCH-I545 using Tapatalk

 

[SD6.7]

Here ya go, 20x10 welds with 35x13.50 tires on a 2.5" leveling kit. I had to trim just a tiny bit of the pinch weld and some of the inner fender, they clear the front bumper just fine. It was a small enough amount of trimming that I used a dremmel tool. Don't sell your wheels a 10 wide is great size rim for these trucks

Awesome pics and good info thank you! Nice truck!


Sent from my iPad using Tapatalk

 

[SD6.7]

20x10 leveled with 305/55/20

I like the ride, gray with black is sharp!


Sent from my iPad using Tapatalk

 

[mattmal9]

just looking for some feedback, would a 20x12 -44 offset with 33 inch tires clear on a 3" leveling kit ? Sounds like it would definitely rub the inner fender, but any worse?

 

[WHY NOT]

You could probably getaway with that with a 33" tire. I haven't seen that combo though