20x12 on stock height trucks

[jtpappy]

4800 springs no rear block


Sent from my iPhone using Tapatalk

 

[fsu stroker]

I got a 2wd 02 and I'm getting 20x12s and has anyone put a 275/55r20 on a 20x12 yet?

I've got 275/70r18 on 18x12s with 2" spacers
The tires came on the truck and had full tread so I found some 18x12 Ion forged and stretched em on there for now. I'm planning on 33x12.50 toyos for my next set.

03, 2wd with 4x4 axle, 1.5" level, no rear block,

I edited the piss out of these ones...

 

[swinky]

Why are they black?

Sent from my HTC One using Tapatalk

 

[fsu stroker]

The guy I bought them from painted them I believe. The paint is chipping pretty bad in some spots so I'll powder coat them eventually

 

[fsu stroker]

They were sitting a while before I got them...

 

[swinky]

That's a damn shame.

Sent from my HTC One using Tapatalk

 

[fsu stroker]

Yeah, I couldn't believe it when I found them.

 

[Josh@DirtyDiesels]

Thats a good looking size setup though. I would roll with it but drop the front down an inch or two.

 

[RedRice589]

I really like the amount of sidewall on the 18's I miss mine really helps on these stupid Pa roads... Erie.... Ugh.

 

[taterthedog]

I think it looks pretty good.


Sent from my iPhone using Tapatalk

 

[fsu stroker]

Thanks guys! I was able to trim just enough so it doesn't rub at all so any lower and it would rub pretty bad.

 

[STROKIN N STYLE]

Well its not stock height but i got 37x13.5 on twelve wides with only a 2.5" level kit. Super happy with it

Sent from my SGH-T989D

what offset wheel? How bad does it rub? Just a leveling kit, or 1" spacer as well, what size rear block?

 

[Wastegate]

what offset wheel? How bad does it rub? Just a leveling kit, or 1" spacer as well, what size rear block?

-Offset are -44
-Built these radius arms to extend the wheelbase 1", then trimed the bumper. Still tickles the factory mudflaps at about half a turn from full lock but receding flaps will take of it.

- Used only a budget boost 2.5 procomp level kit.
- Factory f350 block. Rubs the factory flaps on the back too but receding ones would fix it aswell. Got pmfs 3.5 shackle flip and 1" lower block as well as other goodies to raise another 2" to allow more travel but just want to drive it now haha


Sent from my SGH-T989D

 

[bft blue oval boys]

I finally got my stuff on so I figured I'd post up since I actually have what the title of the thread is lol

Completely stock suspension up front with 1" blocks in the rear so it sits level. 305/55 Toyo AT2 with Gear Alloy 20x12 -44. It didn't actually rub but we did a little trimming and pulled the fender liner back just to be on the safe side so it wouldn't hit when I went over a bump or something cause they were pretty close. Here she is....

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[WILD_PHIL]

Looks great

Back to a Cummins? Looks like it.

 

[bft blue oval boys]

Looks great

Back to a Cummins? Looks like it.

Thanks but I'm not understanding your question lol. If you're asking if it's backed up to a Cummins in the driveway then no, that's my brothers F-150...

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

Edit: nevermind, that's your sig lol. My bad

 

[WILD_PHIL]

Lol Yeah I should go ahead and change that. I sold my 6.4 and started driving a 12v. I'll be back in the 6.4 game in a few months. ECSB 4x4 race truck. Whoop whoop lol

Back to a Cummins? Looks like it.

 

[DSG03bolt]

4800 springs no rear block


Sent from my iPhone using Tapatalk

Looks Good. I'mAbout To Do This Same Set Up. Be A Lot Different For Me lol:toast:Lol

 

[Derkperk]

Randall - really like those double barrel stacks. :thumbsup:

 

[bft blue oval boys]

Randall - really like those double barrel stacks. :thumbsup:

Thanks! I love them! Honestly though, more people seem to like them than I thought they would lol. I expected some haters for that one

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!