20x12 on stock height trucks

[madman1234509]

4800 and no rear spring will be pretty level, its the 4400lb spring that drops the front a bit more

 

[pog]

i wasnt sure if people were removing the overload spring or not. im fine with removing the block dont wanna mess with the leaf springs.

 

[OUTLAW_6.4]

would 4800 springs up front and no rear block make a 350 sit level? thinking of dropping the truck. possibly 20x12 -44 off set rim with 420s.

No, i just did this... it looks lower in the rear. Going to add .75 -1" block. 2009 F250 ex sb

 

[OUTLAW_6.4]

i wasnt sure if people were removing the overload spring or not. im fine with removing the block dont wanna mess with the leaf springs.

I wouldn't go any lower than 4800.. i'm guessing 4400 will have to trim the bump stops. I also wouldn't remove the fat bottom leaf that helps with axle wrap unless you have traction bars

 

[Mike@MPD]

This is mine with 4400lb springs with the bumpstops cut strapped down

 

[Josh@DirtyDiesels]

This is mine with 4400lb springs with the bumpstops cut strapped down

you didn't take the block out yet did you?

 

[Mike@MPD]

Fck no

 

[pog]

mike why havent you removed the rear block? any rubbing with the 4400 springs?

 

[Mike@MPD]

Oh lol I thought he meant the engine block, had to do a little creative render massaging lol, literally a tiny amt that you cant see, Didn't have time to take the block out

 

[Josh@DirtyDiesels]

Oh lol I thought he meant the engine block, had to do a little creative render massaging lol, literally a tiny amt that you cant see, Didn't have time to take the block out

No I meant the rear block LOL LOL I was gonna say it looked a little ass high when I saw it the other night

 

[pog]

LOL. so anyone running 20x12 -44 offset with a 305-50 tire on 4800 springs? i wanna know if it will rub

 

[madman1234509]

I thought mike at mpd is running 20x12 with nitto 420s ..... not sure on thr offset

 

[pog]

hes running 4400 and hes trimmed some shyt from what he said

 

[Mike@MPD]

Dented the bottom of the fender under the truck just a little bit, and yes I am running the tires and rims you are looking at pog

 

[madman1234509]

Well then you can imagine that 4800 lb spring will probably rub just slightly less

 

[pog]

i dont mind if it rubs the fender lining. but i dont wanna damage the fender itself

 

[pog]

Not exactly stock height but 20x12, 4800 springs and no blocks

i think justin said his didnt rub. this is the look i want.

 

[Frank_C]

Mike do you still have the spacers on?

I'm finally going to get my 20x12's on in a few weeks, also lowered on 4400lb springs and 305/50 420's for tires. I hope it doesn't rub the fender, I don't plan on having spacers. Not sure if that would help or hurt the situation.

 

[Mike@MPD]

Yes I still have the spacers on

Sent from my SCH-I545 using Tapatalk 2

 

[Josh@DirtyDiesels]

Mike do you still have the spacers on?

I'm finally going to get my 20x12's on in a few weeks, also lowered on 4400lb springs and 305/50 420's for tires. I hope it doesn't rub the fender, I don't plan on having spacers. Not sure if that would help or hurt the situation.

Would think that the spacers would make that issue worse...