7.3 exhaust housing

[powersmokin88]

So I was looking at some SD turbos laying around and was looking at the a.r numbers on the hot side and have some with 1.15 1.00 but only one has a .84 and never have seen a .84 on a stock turbo and haven't seen that you can buy them.

 

[under pressure]

Stock SD is gated .84, 99-03

Care to sell a 1.0

 

[powersmokin88]

I just never looked at them and just waned to know and I thank I am going to keep ahold of them for now I will let ya know when I do.

 

[Tonka350]

Id buy a 1.15 if you wanted to sell.....orI have a stock .84 Id trade for it ;-)

Chad

 

[jaybuller]

Are the 1.00 and the 1.15 gated like the .84?

 

[Dmstrucks02]

My 1.00 is gated

 

[under pressure]

there is gated and non gated 1.0s
i dont believe there was ever a gated 1.15

 

[powersmokin88]

The .84 and 1.00 are gate i dont beleave there is a gated 1.15 out og the 3 i have they aint and i thank i am going to keep ahold of them for now.

 

[00powersmoke]

I have seen the 1.00 gated and non gated. What did the gated 1.00 come on?

 

[firehunter]

I have one of each.

The 1.0 on the wife's rig is gated and is a Banks' piece (thanks Joe). The 1.0 on my rig is a non-wastegated unit I got from Beans with the high flow adapter (non-EBPV).

 

[CSIPSD]

So I was looking at some SD turbos laying around and was looking at the a.r numbers on the hot side and have some with 1.15 1.00 but only one has a .84 and never have seen a .84 on a stock turbo and haven't seen that you can buy them.

You've never seen a .84 on a stock turbo?

What trucks are you looking at? Every single superduty that rolled off the assembly line had a .84 housing on it...

 

[under pressure]

[/QUOTE]What did the gated 1.00 come on?[/QUOTE]

I believe it was only an aftermarket option on a SD turbo, around 500/600 $

 

[PatMan]

Id buy a 1.15 if you wanted to sell.....orI have a stock .84 Id trade for it ;-)

Chad

I've got a non-gated, EPBV 1.15 A/R housing that I think came out of a van.
Doing me nothing but sit'n on the shelf, and I probably won't use it.
if you're interested or anyone else, shoot me a PM.
But to keep the thread on track - here's what a non-gated, EPBV 1.15 A/R looks like.

 

[psduser1]

What did the gated 1.00 come on?[/QUOTE]

I believe it was only an aftermarket option on a SD turbo, around 500/600 $[/QUOTE]
Can't agree. "Most" l99-03 sd I ve looked at have 1.0 gated housings, a few .84 housings. It may have depended on the trim ???? package, or gear ratio?

 

[CSIPSD]

What did the gated 1.00 come on?

I believe it was only an aftermarket option on a SD turbo, around 500/600 $[/QUOTE]
Can't agree. "Most" l99-03 sd I ve looked at have 1.0 gated housings, a few .84 housings. It may have depended on the trim ???? package, or gear ratio?[/QUOTE]

Not correct. NO 7.3 F-250, F-350 superduty came from the factory with anything but a .84 exhaust housing...

Sorry, just facts.

 

[00powersmoke]

so the gated 1.00 is aftermarket only?

 

[Viking]

Van turbo

 

[rat49f6]

Van turbos are 1.15 non wastegated

Sent from my SGH-T889 using Xparent Green Tapatalk 2

 

[Viking]

Is it only aftermarket then? I haven't slept and read way too much over the night haha. I've seen pics of stock 1.0 a/r housings.

 

[CSIPSD]

Is it only aftermarket then? I haven't slept and read way too much over the night haha. I've seen pics of stock 1.0 a/r housings.

You have not seen pic's of stock 1.0ar EXHAUST HOUSINGS...

They never came from Ford with a 1.00 exhaust housing. Sorry, just never happened.

You may have seen compressor housings that were 1.00, becasue every 99.5-2003 came with a 1.00 compressor housing, tied to a .84 exhaust housing...