JohnDeereFarmer
New member
- Joined
- Nov 27, 2012
- Messages
- 26
- Reaction score
- 0
Hey guys new to this forum, I'm on the nation and FTE and joe recommended I stop here. Without all the boring details I did a late 99 swap on my 2000 and can not get this thing going. Ended up taking it to a trusted mechanic so I could get some family time in on leave.
The issue is Icp pressure. At first it was non existant. I tried a working ipr and a cleaned one. We've checked everything, LPOP checks out, injectors are all in secure, put a new ipr on and they got it sputtering and built some more pressure before it died. The injector spouts aren't returning much oil and were all stumped.
Tried 3 Icp sensors, has a new ipr, hpop nut is torqued down, all wires are good, electronically everything checks out. Where is my pressure going, or could the pump just be bad? It was a strong pump prior to the swap.
The issue is Icp pressure. At first it was non existant. I tried a working ipr and a cleaned one. We've checked everything, LPOP checks out, injectors are all in secure, put a new ipr on and they got it sputtering and built some more pressure before it died. The injector spouts aren't returning much oil and were all stumped.
Tried 3 Icp sensors, has a new ipr, hpop nut is torqued down, all wires are good, electronically everything checks out. Where is my pressure going, or could the pump just be bad? It was a strong pump prior to the swap.