Drop in batmowheels for stock 6.4 turbos

STROKIN N STYLE · Sep 22, 2011

bigrpowr said:
You picked the wrong hobby. LOL

Amen brotha

Jeff@Spartan · Sep 22, 2011

jdgleason said:
You MIGHT scrape 650 with Elites turbos but I would be doubtful. Due to LP wheel design I dont think it would be do able for Industrials. Elites turbos outflow industrials.

With stock fuel, you would be correct. However, Mike Dillehay did 682 on fuel with tow power's, 60's, Elite's stage 1 pump, and ported heads. I think 700 is possible without ported heads, but that is just me. Other airflow mods would be necessary to keep it clean though.

bigrpowr · Sep 22, 2011

08stroker250 said:
With stock fuel, you would be correct. However, Mike Dillehay did 682 on fuel with tow power's, 60's, Elite's stage 1 pump, and ported heads. I think 700 is possible without ported heads, but that is just me. Other airflow mods would be necessary to keep it clean though.

along with ported rails, valve train, wastegate, and im sure stuff im missing... thats a $20,000+ pricetag baby.

Jeff@Spartan · Sep 22, 2011

Yea, but I don't think the cylinder heads are necessary for 680. They definitely help though. I think with that new ported manifold and an intake elbow/CAC pipe setup like you have, 680 would be no problem on Tow Powers and 60-85 hp nozzles. I could be wrong.

O2ShootTheJ · Sep 22, 2011

are we ever gonna hear some real results on this or what?

Erikclaw · Sep 22, 2011

Is this even installed on a truck to get #'s from??

Craig@MFI · Sep 22, 2011

truck comes in monday
we were waiting for a truck to come in for headgasket job

87jumpy · Sep 22, 2011

I finally got a chance to look at my truck tonight... 5 bolts hold the atmosphere compressor housing with one of them looking like it might be a slight pain.

Am I missing something else?

superdutyfarmer · Oct 3, 2011

So its been a week since the truck was supposed to come in for the Batmowheel upgrade plus some other things, any updates on it?

Dustball8504 · Oct 12, 2011

updates?

mhop · Oct 12, 2011

Im going with batmowheel went boom...

Craig@MFI · Oct 12, 2011

Trucks done haven't heard back from customer he liked it I will get feedback

Craig@MFI · Oct 12, 2011

mhop said:
Im going with batmowheel went boom...

Batmowheels don't go boom like those junk precision turbos
There hasn't been on failure yet unless they overspun it and fried the bearings

Dustball8504 · Oct 12, 2011

Did u get any boost or backpressure readings between stock and the batmowheel? How about sotp difference?

jdgleason · Oct 12, 2011

Craig@MPD said:
Batmowheels don't go boom like those junk precision turbos
There hasn't been on failure yet unless they overspun it and fried the bearings

Junk precision turbos? Do tell

MINK · Oct 12, 2011

jdgleason said:
Junk precision turbos? Do tell

uh yeah??

Jhaddox · Oct 12, 2011

I've seen a lot exploding just on this site alone...

MINK · Oct 12, 2011

Jhaddox said:
I've seen a lot exploding just on this site alone...

I see where your coming from now. Its hard for me to doubt precision as they have had a great rep and still make one of the best 2.6 chargers money can buy IMO.

Dzchey21 · Oct 12, 2011

Jhaddox said:
I've seen a lot exploding just on this site alone...

Probably alot more precisions then batmos.

Turbos just don't go boom... kinda need the full story. Aaron had one last over 100 passes with crazy boost/drive numbers. And every big pulling truck runs a precision rather than a batmo. Speaks numbers to me...

Sent from my DROIDX

Jhaddox · Oct 12, 2011

Dzchey21 said:
Probably alot more precisions then batmos.

Turbos just don't go boom... kinda need the full story. Aaron had one last over 100 passes with crazy boost/drive numbers. And every big pulling truck runs a precision rather than a batmo. Speaks numbers to me...

Sent from my DROIDX

I worded that wrong, a lot of people run pte turbos, so there will be more turbos failing, simply because so many people run em

I was late for class and trying to say what I wanted quick

MINK said:
I see where your coming from now. Its hard for me to doubt precision as they have had a great rep and still make one of the best 2.6 chargers money can buy IMO.

:whs: