Found my vibration...LOL

CSIPSD

New member
Joined
May 18, 2011
Messages
5,284
Reaction score
5
Location
Bend, OR
601675_156091334565943_113805245_n.jpg


946797_156091331232610_246355984_n.jpg


Pisses me off thats the same one I replaced about a year ago...

Did both the one's at the pinion and the carrier...
 

CSIPSD

New member
Joined
May 18, 2011
Messages
5,284
Reaction score
5
Location
Bend, OR
What ever house brand they had at what ever autozone/orileys/napa I got them from back then. Cant remember now, it broke then in the worst part of denver and all I cared about was getting the hell out of dodge!

These ones are "Precision" brand from Orileys. Lifetime waranty bla bla bla...
 

greyford1979

Active member
Joined
Jan 22, 2013
Messages
1,521
Reaction score
1
Location
Copley,Ohio
I bought some Napa ones for my 79 once because I figured they will do for a little while till I bought better ones. After 2 weeks they exploded and sent the drive shaft flying into the driver's side rocker. :doh:
 

lincolnlocker

Well-known member
Joined
May 25, 2011
Messages
27,913
Reaction score
177
Location
Central Michigan
that will do it joe, lol... i was in a similar situation out in buffalo ny while at work... used autozone lifetmers. 2 out of the three in my rear where bad so i opted to change all three.. big mistake.. lasted 10k... changed all three back to stock spicers from ford.. wont ever do that again unless of course im in a bind but will have it changed ASAP... spicers in every thing i own for that matter.

live life full throttle
 

Jomax

Active member
Joined
May 18, 2011
Messages
8,576
Reaction score
9
Location
Arizona
Did you get movement trying to move them by hand before taking them apart?
 

CSIPSD

New member
Joined
May 18, 2011
Messages
5,284
Reaction score
5
Location
Bend, OR
Did you get movement trying to move them by hand before taking them apart?

Its been doing it for about 700 miles, and I've spend several hours over that time under there grabbing and shaking and banging on ****! It was flat pissing me off to the point I was driving hard to make it break! Crawled under Monday and saw the grease seal was falling off. Then I could see it.

Once I beat it out, the damn thing fell apart.
 

TERRCO

Member
Joined
May 18, 2011
Messages
781
Reaction score
2
Location
Devine,Texas
I was replacing the same 2 u-joints about every two years and finally had the driveshaft replaced and no more issues.
 

lincolnlocker

Well-known member
Joined
May 25, 2011
Messages
27,913
Reaction score
177
Location
Central Michigan
Its been doing it for about 700 miles, and I've spend several hours over that time under there grabbing and shaking and banging on ****! It was flat pissing me off to the point I was driving hard to make it break! Crawled under Monday and saw the grease seal was falling off. Then I could see it.

Once I beat it out, the damn thing fell apart.

piszes me off just thinking about it... hate trying to find broken chit that is still tight.

live life full throttle
 

Latest posts

Members online

Top