Picked up a 17
- Thread starter Jmuck
- Start date
Spatel23
Moderator
LOL
Mikeyfitz
New member
We shall see with the time crunch but it's Fastlane Garage. Pretty big vendor booth in there
Vader's Fury
Active member
Front is out. Rear is in primer and if I decide to piss my wife off tonight I'll have the front in primer.
So where is the picture from last night of the front axle in primer?
My wife's happy lol. We went ahead and shot the final costs on the rear to get it knocked out. I decided to take a little extra time and smooth out some spots on the front so it worked alright. Going in early to finish the front and tape it up for primer.
Edit: Sorry for the blurry pic
Here's the rear. It's by no means perfect, but looks damn good. I'll buff on it some this weekend.
Front's current situation.
The spindle's and shafts I shot in gloss black for some contrast. I'm leaving the drag link, tie rod etc gloss black for some contrast.
Last edited:
Twinturbostroker
New member
Curious to see how this thing turns out
Front is doneski. Turned out really nice for some amateurs. I haven't picked up a paint gun in ages.
I'm redoing the rear. Had some rough spots that I just couldn't live with. Body worked it earlier and hitting in primer tomorrrow. Goal is to have the front buttoned back up by Sunday and the rear will have to wait until the PMF trac bars get in Tuesday and hopefully get them painted that night.
I'm redoing the rear. Had some rough spots that I just couldn't live with. Body worked it earlier and hitting in primer tomorrrow. Goal is to have the front buttoned back up by Sunday and the rear will have to wait until the PMF trac bars get in Tuesday and hopefully get them painted that night.
BIG JUICE
Member
Looks great man! You are encouraging me to spend lots of money
TLyons90
New member
Looking so good! What kind of paint are you using? I figured most jobs like this were powder...
Thanks. I'm happy with it so far. It's nothing compared to most though.
PPG materials.
Most do powder, but I'm in a time crunch and didn't want to completely disassemble the axles and rebuild them for powder.
01pwrstkr
Active member
Looks great!
Sent from my SM-N920R4 using Tapatalk
Sent from my SM-N920R4 using Tapatalk
TLyons90
New member
I don't blame you at all! I try and diy everything and since I don't have access to powder equipment but do paint and a gun I might attempt something simular myself!
Looks excellently done!
Thank you. We normally sub our paint work out to a friend at a local body shop, but I wanted to do it since I haven't had a chance to do real work on any of my builds the last few years. The bumpers were a different story though, I suck at body work and wanted them perfect since everyone will see them haha.
Our paint booth here is only large enough for us to do taillights and calipers etc so we had to improvise and use our spray liner booth. Lots of work to clean it up end of each day to get it ready to paint. Luckily two of my employees are pretty handy when it comes to paint also.
Mikeyfitz
New member
Its looking awesome brother! Cant wait to see it next week!
May end up keeping my 17 after all, or get a raptor. This is just giving me more ideas
May end up keeping my 17 after all, or get a raptor. This is just giving me more ideas
lincolnlocker
Well-known member
axles look badass!! turned out great for a "time crunch" job.. lol
live life full throttle
god bless america and the farmer who feeds your fat ass
live life full throttle
god bless america and the farmer who feeds your fat ass
Front is in, just lacks brake lines, trac bar and final torque of bolts.
Rear is under the truck. Thrash fest starts tomorrow to get the traction bars painted and rear buttoned up. After rolling the rear out of the booth, I'm disappointed in myself. Couple spots aren't so great, but I have to remind myself it's a daily driver.
Headlight assembly starts tomorrow also.
Rear is under the truck. Thrash fest starts tomorrow to get the traction bars painted and rear buttoned up. After rolling the rear out of the booth, I'm disappointed in myself. Couple spots aren't so great, but I have to remind myself it's a daily driver.
Headlight assembly starts tomorrow also.
Latest posts
-
Will a 1996 F6TZ-9A451-F engine wiring harness work on a 1997 f250 HD ?
- Latest: 6.7powersmoke
-
-
-
-