Rigid Rock Lights

josh@thedieselcartel · Mar 24, 2014

How many of you have seen the new Rigid Rock Light Kits? I had a chance to install a set of these on my customers F250 Platinum that I've been building over the past couple of months and I was highly impressed with them. The kit is very complete and the lights are extremely bright. These can be used in so many applications.

Wheel Wells
Bed Lighting
Entry Step Lighting
Boat Applications
etc etc

Crack85 · Mar 24, 2014

Those are pretty sweet

josh@thedieselcartel · Mar 25, 2014

4 Sets left....get them while you can!

Layson · Mar 25, 2014

What is the price on those?

josh@thedieselcartel · Mar 25, 2014

Layson said:
What is the price on those?

$300 shipped for a set of 4 Lights with all wiring and hardware.

Layson · Mar 25, 2014

That isn't a bad price for that setup. Pretty nice!

Buck1 · Mar 28, 2014

What is actual size of light?

Sent from my SCH-I545 using Tapatalk

neverkickn · Mar 28, 2014

I just wanna know the specs on the fuse block. Looking to bring all the junk off my battery posts and to the fender.

strokin'_tatsch · Mar 28, 2014

Wonder how 4 of these would do for AMP step lighting.

powerstrokinfirefighter · Mar 28, 2014

neverkickn said:
I just wanna know the specs on the fuse block. Looking to bring all the junk off my battery posts and to the fender.

You cab find fuse blocks similar to that at most of the part stores. I ran a few on my jeeps

B.Warning · Mar 28, 2014

Buck1 said:
What is actual size of light?

Sent from my SCH-I545 using Tapatalk

Here's mine that showed up yesterday.

Sent from my XT1055 using Tapatalk

NEVRNF · Mar 29, 2014

Can you get just the lights? My excursion already has the crappy AMP kit with a couple of dead lights.

Morgan@Midwest Diesel & Auto · Mar 29, 2014

I doubt the wiring adds that much cost. If you can buy them
Individually, I would bet they're more expensive as a single than a kit.

NY_Mott · Mar 29, 2014

Does anyone have pictures of these installed?
I am concerned about the coverage area of the lights. Everything I have seen online so far shows gaps in the light hitting the ground.
I am looking for no gaps in the light pattern and IMO only see this happening with two kits or building your own.

smokinstroker · Mar 29, 2014

Explain what you mean by spots being blocked jay?

I have done 2 of these and they are a pretty slick kit. For how small they are, they put out a very good amount of light.

josh@thedieselcartel · Mar 29, 2014

NEVRNF said:
Can you get just the lights? My excursion already has the crappy AMP kit with a couple of dead lights.

It is cheaper to just get the 4 light kit. You would not need to use the wiring harness and fuse block that rigid supplies. $300 for the 4 lights. The individual lights are like $85 each I think.

josh@thedieselcartel · Mar 29, 2014

NY_Mott said:
Does anyone have pictures of these installed?
I am concerned about the coverage area of the lights. Everything I have seen online so far shows gaps in the light hitting the ground.
I am looking for no gaps in the light pattern and IMO only see this happening with two kits or building your own.

You will need to add more lights to get complete coverage.

Here is an example of a 4 light kit that I installed. These are installed high and center of each wheel opening.

I would suggest getting a second 4 light kit and doing the frame rails or rockers of the truck. That would get you some really nice bright coverage.

I will cut you a deal if you buy two kits together.

QtrHorse · Mar 29, 2014

NEVRNF said:
Can you get just the lights? My excursion already has the crappy AMP kit with a couple of dead lights.

Does the color of the housing matter? If the housing is white, would that matter? If it does not, look up any electrical sign supply distributor in your area and pick up some channel letter LED modules. The only problem is that they only come in white but will be just as bright(depending on what you get) and cheaper. You will need to cut them apart and wire them up. They are all 12v.

Send me a PM if you want to try some out. I have some brand new modules you can have if you pay the shipping.

Buck1 · Mar 29, 2014

B.Warning said:
Here's mine that showed up yesterday.

Sent from my XT1055 using Tapatalk

Thank ya sir, appreciate the reference!

Sent from my SCH-I545 using Tapatalk

NEVRNF · Mar 30, 2014

InMotionJosh said:
It is cheaper to just get the 4 light kit. You would not need to use the wiring harness and fuse block that rigid supplies. $300 for the 4 lights. The individual lights are like $85 each I think.

Not to start a fight here. I just googled them and i found them for $120 a pair without the wiring.