Start of my build

[Skinny]

Thought id share some pics of my compounds build not greatest pics but. With some help from JJ @ Dozers we used some of his parts from his reg return but thought we would try something different and feed the back of the heads and exit out the front please dont flame we are just trying this cleans up the engine alot! Doing a remote oil filter will be posting more on that as it goes. We had some old Fass systems at the shop that where old stock so to save a couple bucks. BIG BIG BIG THANKS to PDR Diesel here in BC for taking on the build:clapping:

 

[Skinny]

and if one of the mods could add a t at the end of star...opps

 

[Blacksmokin22]

Who's rr are you using? Let us know how feeding the back of the heads works out!! I like the idea. Good luck on yur build, looks good so far!!

 

[Pizza pig]

feeding the rear and returning the front is no different than feeding the front and returning the rears. I feed the rear of the heads and return off the front on my truck.

 

[Skinny]

Made most of it at the shop. Got a kit from dozers decided to do something else use a little of his kit made the rest of it.


Sent from my iPone sitting on the crapper

 

[Skinny]

And Greg is right it's no different works the same but looks a lot cleaner.


Sent from my iPone sitting on the crapper

 

[Blacksmokin22]

Yea I know it's no different. Fuel doesn't know the front or back of the heads lol

 

[Skinny]

Turbo is in next week from bullseye s475 83mm 1.25ar t4 thanks for the help on that one Mr. Ellerton


Sent from my iPone sitting on the crapper

 

[motoxracer42]

The front of the head is actually quite a bit higher than the back, since its a regulated return its irrelevant but for someone not flowing through it makes it a pain to prime.

 

[Extended Power]

I got mine flowing through the front of the heads first and out the back because I didn't want any added heat from the exhaust up pipes added to the fuel before it gets to the cylinders.

Since it passes out the back of the heads, and then to the return, I added a fuel cooler to mine as well.

 

[Matt]

Where'd you get the oil relo plate, and is it-12?

 

[Skinny]

bodacious diesel


Sent from my iPone sitting on the crapper

 

[Skinny]

Should be Justin @ PDR diesel said he was using -12 ill be going back To the shop Monday and will have more info.


Sent from my iPone sitting on the crapper

 

[Skinny]

Was like Christmas today for me!
Oil cooler cover for filter relocation

Fass fuel pump

PDR updated up pipes

New intercooler



Sent from my iPone sitting on the crapper

 

[Skinny]

S475 83/1.25ar for bullseye





Sent from my iPone sitting on the crapper

 

[strokethis_06]

Nice! Are you gonna dyno this on 37s? I would love to see the numbers!

 

[Skinny]

Yes I will probably run it on BDs dyno in the spring the truck will be lowerd and 32s want to switch it up.


Sent from my iPone sitting on the crapper

 

[vcassens]

Yes I will probably run it on BDs dyno in the spring the truck will be lowerd and 32s want to switch it up.


Sent from my iPone sitting on the crapper

Can't wait for that I want to see what mine will look like lowered. Where did you get that platform to stand on?


Sent from my PC36100 using Tapatalk 2

 

[Skinny]

Ill have to ask the boys at the shop in thinking snap on ?


Sent from my iPone sitting on the crapper

 

[kyle43335]

Thought id share some pics of my compounds build not greatest pics but. With some help from JJ @ Dozers we used some of his parts from his reg return but thought we would try something different and feed the back of the heads and exit out the front please dont flame we are just trying this cleans up the engine alot! Doing a remote oil filter will be posting more on that as it goes. We had some old Fass systems at the shop that where old stock so to save a couple bucks. BIG BIG BIG THANKS to PDR Diesel here in BC for taking on the build:clapping:

i feed from the rear and return from the front always. makes for a nice tight clean install