Twin Turbo Sizing

Extended Power · Apr 27, 2013

Seems there is a truck from one of the people here that picked up 90 rwhp, and 4 mph from just a wheel change.

Can't wait to get mine installed.

Meniacal_Mark · Apr 27, 2013

I wouldn't doubt it, going from a 40" on 20" setup, to a 35" on 20" setup would be a huge weight reduction. There's a video on youtube of the cereal killer doing 12.8 on the 1/4 mile on 40's and a 12" lift.

NoSlow6.0 · Apr 27, 2013

Didn't Mike from Maryland diesel put down over 1000 on a single turbo with a batmowheel fuel only at TS last year with the white truck or the year before. Would y'all think running Batmowheels in both turbos would be better. Also what brand of turbos seem to hold up better at big numbers.

Meniacal_Mark · Apr 27, 2013

I dunno about Mike, but Craig's King Kong put down 13xxrwhp on nitrous with a single.

FaSSt9602 · Apr 27, 2013

I think you everyone needs to stop comparing what any particular turbo will do on a Cummins or even a 6.4. Totally different animals...

Coxey Diesel · Apr 27, 2013

Do y'all think Martin's conventional elite 295's would spool a billet 66/88 setup? I know he's kinda looking to make as much on fuel as possible but to my understanding he's sprayed it pretty good before.

Redneck6.0L · Apr 27, 2013

Borg turbos are pretty bullet proof. But the duracrap guys are having great luck with the garret gt55 chargers

NoSlow6.0 · Apr 28, 2013

Yea along time ago when I still had Elite 225's and a stock turbo I hit it with a 277 horse shot of gas at a suncoast Dyno Day years ago. It cleaned up the smoke nicely. LOL

NoSlow6.0 · Apr 28, 2013

Meniacal_Mark said:
I dunno about Mike, but Craig's King Kong put down 13xxrwhp on nitrous with a single.

The truck I'm thinking about had a florescent green 6.0 and a 6.4 fiberglass front end. cap and the interior was gutted. Also had an Ice box in the cab. He told me he didn't spray it and it was a little over a 1000. At the time he was praising the batmowheel for alot of good gains. But recently Ive heard people have been having issues with them. It was the same year Ice Monkey hit the wall on a pass and fudded his front end up really bad.

NoSlow6.0 · Apr 28, 2013

Extended Power said:
Seems there is a truck from one of the people here that picked up 90 rwhp, and 4 mph from just a wheel change.

Can't wait to get mine installed.

Which wheel is that?

Extended Power · Apr 28, 2013

NoSlow6.0 said:
Which wheel is that?

The new 80mm 7 blade staggered hub design wheel.

TooMuch03 · Apr 29, 2013

Extended Power said:
The new 80mm 7 blade staggered hub design wheel.

Do you have a link?

g2shuck · Apr 29, 2013

I believe the staggered hub wheel is from Jose at FI

Coxey Diesel · Apr 29, 2013

g2shuck said:
I believe the staggered hub wheel is from Jose at FI

That's it. He showed it to me a couple weeks ago.

TooMuch03 · Apr 29, 2013

That is what i thought but wasn't sure. thanks, guys

Extended Power · Apr 29, 2013

Yes, it's from Jose at Forced Inductions.

Wasn't sure just how far I could go with slingin some other vendors product on here.

I got an 11 blade secondary, and his new 7 blade primary coming.

slc dzl · Apr 29, 2013

^^^ excited to see this set-up. Willing to share specs?

motoxracer42 · May 2, 2013

80mm is capable of 1000hp all day long at least mine is haha. When your polishing turds, you just gotta compensate with n02 haha. Been doing it for years now.
I was at 1097 with a 66 over 83. A std 80 will do it just fine.

powerstrokedkid87 · May 2, 2013

Meniacal_Mark said:
I wouldn't doubt it, going from a 40" on 20" setup, to a 35" on 20" setup would be a huge weight reduction. There's a video on youtube of the cereal killer doing 12.8 on the 1/4 mile on 40's and a 12" lift.

I ran a 13.4 with room to improve with 38's on 24s...that was with the single 66 t3....would like to get into the 12s with some practice with the compounds. The plan was 66 and a 80, then as i mention go to an 88, but maybe well just swap wheels after a while see what it does.

I cant wait for the compunds, im more excited then a 5 year old on christmas.....parts cant come in soon enough

MorganY · May 2, 2013

TooMuch03 said:
an S480 is not really 1000 hp cabable. I would go with a 66 and S488, or better yet, an 88mm GTX charger.

Now you're talking!

As for making 1000 on an 80? It is possible.

I know its different, but Super08Duty's 6.4 hit 1137 last weekend with a single 80mm GTX on a single 125 shot