700 hp goal build

joe d

New member
Joined
Mar 12, 2016
Messages
770
Reaction score
0
Location
monroe mi
Man thats moveing... For a big truck. I wonder how slow 238-100 and a s366 is lmao. How street friendly are yalls setups.
 

TyCorr

New member
Joined
Jun 23, 2011
Messages
15,461
Reaction score
0
Track time in my sig..

Thats faster than my time on 35s and with a 38r. I need trac bars though. Now my lift is off, rearend is fixed and tracbars are on thecway. Hoping for a 13. Ccsb 00 7.3 hbsr irate fuel pis 250/200 billet 38r...built billet trans..
 

Powerstroker7.3

New member
Joined
Oct 8, 2013
Messages
519
Reaction score
0
Location
waxhaw NC
c9fa97fda0ea4a9f0ef7952240afba81.jpg

Ccsb on fuel


Sent from my iPhone using Tapatalk
 
Joined
Jan 26, 2014
Messages
958
Reaction score
5
Location
FL
Thats faster than my time on 35s and with a 38r. I need trac bars though. Now my lift is off, rearend is fixed and tracbars are on thecway. Hoping for a 13. Ccsb 00 7.3 hbsr irate fuel pis 250/200 billet 38r...built billet trans..

You should be about there with that set up, getting it lowered should help a ton. I was gonna run my truck tomorrow, but ended up having to work. I still have my stealth stage 2 sitting on the shelf and I'm on 37s now. I was hoping to break into the 12s.
 

powerjoke73

Member
Joined
Oct 5, 2015
Messages
307
Reaction score
0
Is stock drivetrain gona hold up? I have traction bars but can the driveshafts hold the power?
 

Powerstroker7.3

New member
Joined
Oct 8, 2013
Messages
519
Reaction score
0
Location
waxhaw NC
I have been running stock drivetrain so far and no problems. I have track bars but that's it. I'm sure you have gauges and this is where the boost gauge is used. To know what psi to launch at. I usually launch between 10-15psi of boost but with some practice you will find the sweet spot


Sent from my iPhone using Tapatalk
 

powerjoke73

Member
Joined
Oct 5, 2015
Messages
307
Reaction score
0
Yeah I knew the sweet spot on my old setup (did some 4x4 boosted launches on back roads). Would leave around 12 psi. Just have to figure out the new setup and then see if I need anything adjusted
 

TyCorr

New member
Joined
Jun 23, 2011
Messages
15,461
Reaction score
0
I have been running stock drivetrain so far and no problems. I have track bars but that's it. I'm sure you have gauges and this is where the boost gauge is used. To know what psi to launch at. I usually launch between 10-15psi of boost but with some practice you will find the sweet spot


Sent from my iPhone using Tapatalk

Tick-tock....
 

Latest posts

Members online

No members online now.
Top