Search results

  1. skevac

    Off road diesel fuel

    You would have to ask someone who works on these newwer fuel systems to be sure. It really doesn't matter, unless you found someone who had some fuel left over from before they went to ULSD or got some HSD from Canada all you'll be able to find is ULSD. Being we're on the fuel subject does...
  2. skevac

    Off road diesel fuel

    High sulfur diesel (HSD) and low sulfur diesel (LSD) fuel are nearly impossible to get as now even the newwer farm equipment have DPFs on them and need ULSD. Last I knew you could still get HSD out of Canada but it could only be used in a ship or a train. If you don't have a DPF it would be the...
  3. skevac

    Off road diesel fuel

    No way. Wrong. Doesn't stain anything. Just a red dye for visual. Run the next couple tanks of fuel down as low as you feel comfortable (the lower the better) and then fill up with on road fuel. By then you'll never even know it had dyed fuel in it. There is no difference between off road and...
  4. skevac

    Surging at idle need help.

    It is currently plugged in but not bolted in the intake. When I had the ECM & FICM tuned by PHP they knew I was going to be doing the EGR delete & were supposed to make it so it wouldn't throw a CEL. But, it did so I just plugged it back in and it's laying next to the oil filter housing for now.
  5. skevac

    Surging at idle need help.

    I have a 2005 Excursion with the 6.0. It has a 4 inch down pipe back exhaust no muffler, pcv reroute, Power Hungry Performance ficm mod and 50 hp tune. When idiling the rpm's are surging up and down. This just started after recently installing a Sinister EGR delete, blue fuel spring & updated...
  6. skevac

    My CCV mod

    Just open for now. Going to have to do something other than that before winter.
  7. skevac

    My customized fender vents

    Put them together myself. Stock fender emblems with an aluminum insert from Ebay, OBS factory fender decals, some blue paint and some time.
  8. skevac

    My CCV mod

    Thanks. Before someone asks the hose that comes of the oil fill resevoir is from a smog pump that had been removed from a 86 GMC 6500 truck. Imagine that, more emissions BS that just caused problems that got taken off and thrown in the corner???
  9. skevac

    My customized fender vents

    Finally got rid of those ugly brown fender vents! It may be hard to see in the picture but I also painted the V8 blue to match my truck. With the long holiday weekend I finally got around to doing a few things I really wanted to get done on my truck. Sucks how the things that "have" to be done...
  10. skevac

    My CCV mod

    Here's how I did mine last weekend. I've been reading on this and there's a lot of discussion about being vented to the atmosphere but so far I have had no oily residue or problems. I have had the same setup on my 6.0 for quite a while now with no problems. I would eventually like to plumb it...
  11. skevac

    Just ordered my 2.5 Icon!

    Are you still using the factory rear blocks?
  12. skevac

    Gearhead vs. Spartan vs. H&S opinions needed

    I have to puchase the MCC to get custom tunes right? So, if I do that does that mean I can run anyones custom tunes after doing so? Don't want to sound dumb but, I don't have any exerience with this stuff. Just a lot of reading on here.
  13. skevac

    Gearhead vs. Spartan vs. H&S opinions needed

    I really close to pulling the trigger on a tuner and would like some opinions from people who have actually ran a couple of the tuners listed in the title for comparison to each other. I won't be pulling or racing just looking to get the EPA crap off & make the truck more efficient (better...
  14. skevac

    Official DPC 2013 Updates

    :whs:
  15. skevac

    DPC Round Two: Going for Broke

    What are the dates for the DPC 2013? How much time are you going to have to get your new setup dialed in?
  16. skevac

    New DashDaq Skins

    Those are awesome! Wish I was smart enough to do that. Really like the JD logo one. Could you do a picture that someone sends you of anything (truck, snowmobile, ect.)? Just wondering, don't have a DashDaq yet but looking to get one.
  17. skevac

    Crank Case vent Q's

    How about some pictures of this system and more details?
  18. skevac

    power window thought

    Power window thought I didn't count the wires & it's been a few months since I pulled it apart so I don't recall fully but, the Mustang switches (from the bottom) and wire harness was much smaller in size compared to the SD's. I would have figured that they would use the same type switch in...
  19. skevac

    power window thought

    I had this thought also. So I pulled the switch panel out of the Mustang & the SD's door and they are not the same. Not saying that you couldn't make them work but it's not a simple plug & play operation. I really like the auto up & down feature on the Mustang. Not sure why Ford would do this...
  20. skevac

    First hook in the 6.4

    Try adding a shock or putting on an adjustable shock like the Rancho RS 9000 to keep the front end from "chattering".

Random media

58993f8f
image44
2013-01-15_11-15-54_733
511
IMG_20130409_180326_140
DSCF3417
IMG_5559
IMG_0136
DNR_customs
Camo Feller 3
securedownload_1_7_
The Truck

Latest posts

Members online

Total: 382 (members: 2, guests: 380)
Top