under pressure
New member
- Joined
- Oct 4, 2012
- Messages
- 575
- Reaction score
- 0
Is a 100 % nozzle capable of 600 hp, that sounds like a stretch ?
Just someting i read recently...
Just someting i read recently...
Is a 100 % nozzle capable of 600 hp, that sounds like a stretch ?
Just someting i read recently...
Sounds like one of those "Just because you can, does not mean you should".
Sounds like one of those "Just because you can, does not mean you should".
Sounds like one of those "Just because you can, does not mean you should".
I have 250\200's. Need more air, a stronger Torque Converter and tuning tweaked for them.
I dynoed at 470 with a stock fuel system. It could not keep up with the injectors.
With a 66mm turbo, what number, at the wheels, on fuel, on a Sunday, sunny, 60 degrees, low humidity, stock heads, cam and manifolds, would you expect to be the max for 100%'s?
Instead of bench racing, wouldn't it be easier to post screenshots of the winpep software screen showing the power actually made?
I've never stated that I made _____ power on such and such a setup that I did not include a copy of the Dynojet output graph with power over rpm and smoothing, correction if any and all else right there, unless I was referring to an older pull where I had already provided that info in the past.
I guess I can't comprehend the point of even mentioning anything else. Some people would tell you they made 600hp because somebody told them it should... while others would tell you they made 600hp because the app on their Iphone said they did.... so on and so forth.
It's pathetic.