1994 ½ Ford F350 Crew Cab 4X4
Truck has 190,919 miles on it as of today Feb-26-2014
I bought this truck 3 years ago and have done all of the work myself
Last pull was Feb-15-14 - 874 miles at a gross weight of 16,000 pounds give or take at an average of 9.1 MPG
Below are details of what I have done to this truck
Engine: 7.3 Power Stroke – with less than 100,000 miles on it today. Engine is out of a 1995 truck
Hydra Chip 6 position – Gear Head Automotive
Position 1 – Heavy Tow
Position 2 – High Idle
Position 3 – Stealth
Position 4 – Tow/Economy
Position 5 – Street
Position 6 – All Out
Stage II injectors 150/100 - Full Force Diesel
SRP1 HOP – Beans Diesel
D66 Turbo with 1.15 exhaust housing – Beans Diesel
Bellowed up pipes – Elite Diesel
Milling Oil Pump
3” Super Duty Intake Manifolds
Super Duty Inter Cooler – with customs built tubes
Regulated Return Fuel System – Strickly Diesel
Dual Remote Oil Filters running Amizoil filters
Bypass Filtration running Amizoil Filters
Dipstick Adapter Repair Kit – Strickly Diesel
Boost Fooler – Strickly Diesel
3” down tube into straight 5” to the rear of the truck with 6” tip
Valair Dual Disk Organic Clutch
S&B Cold Air Kit
NEW AC compressor, dryer, and hoses
All new hoses and antifreeze
New Glow Plugs – Ford
NEW Oil Cooler
NEW Power Steering return hose
Computer changed to 1997 for use of ODBII port
Snow Performance – 8-gallon tank in bed
ZF5 speed Transmission – with less than 100,000 miles on it
Tires and Wheels
18 X 10 XD Wheels
325/60R/18 Nitto Terra Grappler
Dana 60 front axle
King Pin axle out of a 1992 F-350
Cross Over Steering
4.10 Yukon Gears – open carrier
Yukon Locking Hubs
Sterling 10.25 rear axle
4.10 Yukon Gears
Yukon Dura Grip limited slip Diff
Suspension
4” SkyJacker
3.5” lift Shackle Reversal Kit Sky Manufacturing
4” Shackle Flip Kit in rear – Sky Manufacturing
Custom track bar on front axle
Customer ladder bars to help with axle wrap on rear axle
5000 pound AirLift bags, compressor and dual gauges for in cab controls
Interior
2002 Chevy 6 way power leather buckets and center console
Chevy Review Mirror with temp and compass
4 gauge A-Pillar – Boost, Fuel Pressure, Right and Left Bank EGT gauges
Single gauge Steering Column Mount – Water Temp
Power Windows and Locks – both rear door locks motors don’t work
drivers switch panel does not control the passenger rear window.
JCV Marine - AM/FM/Cassette with 12 disk CD Changer
Electric Trail Brake Controller
Exterior
Dodge Tow Mirror Conversion
Kodiak Power Steps on each door – 8” drop step for ease of getting in
Front Bumper with 12,000 pound winch – Boondock Bumpers / Backwoods
Rear Bumper – Boondock Bumpers
A.R.E. Cab Height Topper
LUND Sun Visor
RECON Led Lighting (all lights except headlights are LED)
Smoked Taillights lenses
Clear turn and side marker lights and clearance lights
Billet Grill
Stainless Steel Stone Rocker Guards
In bed aluminum truck tool box
This is a used truck that has had a lot of work done. It was my plan to repaint as well as do a customer interior. I bought a newer truck that fits my families needs so here is my pride and joy up for sale!
The truck is being sold as is where it is!!! There is no warranty of any kind!!! The motor has been modified and should never give anyone any problems. Driven responsible it will get you there and back. Hot Rod it and you could tear up parts!!! I built it to pull my Jeep and my wife’s camper, which it does!
I have plenty of pictures as well I can take any picture anyone wants to see, just let me know!!!
I am asking $15,000, which is way, less than I have in the truck to date!
Will consider reasonable offers!!!
Thanks
Chris
316-655-6722
Truck has 190,919 miles on it as of today Feb-26-2014
I bought this truck 3 years ago and have done all of the work myself
Last pull was Feb-15-14 - 874 miles at a gross weight of 16,000 pounds give or take at an average of 9.1 MPG
Below are details of what I have done to this truck
Engine: 7.3 Power Stroke – with less than 100,000 miles on it today. Engine is out of a 1995 truck
Hydra Chip 6 position – Gear Head Automotive
Position 1 – Heavy Tow
Position 2 – High Idle
Position 3 – Stealth
Position 4 – Tow/Economy
Position 5 – Street
Position 6 – All Out
Stage II injectors 150/100 - Full Force Diesel
SRP1 HOP – Beans Diesel
D66 Turbo with 1.15 exhaust housing – Beans Diesel
Bellowed up pipes – Elite Diesel
Milling Oil Pump
3” Super Duty Intake Manifolds
Super Duty Inter Cooler – with customs built tubes
Regulated Return Fuel System – Strickly Diesel
Dual Remote Oil Filters running Amizoil filters
Bypass Filtration running Amizoil Filters
Dipstick Adapter Repair Kit – Strickly Diesel
Boost Fooler – Strickly Diesel
3” down tube into straight 5” to the rear of the truck with 6” tip
Valair Dual Disk Organic Clutch
S&B Cold Air Kit
NEW AC compressor, dryer, and hoses
All new hoses and antifreeze
New Glow Plugs – Ford
NEW Oil Cooler
NEW Power Steering return hose
Computer changed to 1997 for use of ODBII port
Snow Performance – 8-gallon tank in bed
ZF5 speed Transmission – with less than 100,000 miles on it
Tires and Wheels
18 X 10 XD Wheels
325/60R/18 Nitto Terra Grappler
Dana 60 front axle
King Pin axle out of a 1992 F-350
Cross Over Steering
4.10 Yukon Gears – open carrier
Yukon Locking Hubs
Sterling 10.25 rear axle
4.10 Yukon Gears
Yukon Dura Grip limited slip Diff
Suspension
4” SkyJacker
3.5” lift Shackle Reversal Kit Sky Manufacturing
4” Shackle Flip Kit in rear – Sky Manufacturing
Custom track bar on front axle
Customer ladder bars to help with axle wrap on rear axle
5000 pound AirLift bags, compressor and dual gauges for in cab controls
Interior
2002 Chevy 6 way power leather buckets and center console
Chevy Review Mirror with temp and compass
4 gauge A-Pillar – Boost, Fuel Pressure, Right and Left Bank EGT gauges
Single gauge Steering Column Mount – Water Temp
Power Windows and Locks – both rear door locks motors don’t work
drivers switch panel does not control the passenger rear window.
JCV Marine - AM/FM/Cassette with 12 disk CD Changer
Electric Trail Brake Controller
Exterior
Dodge Tow Mirror Conversion
Kodiak Power Steps on each door – 8” drop step for ease of getting in
Front Bumper with 12,000 pound winch – Boondock Bumpers / Backwoods
Rear Bumper – Boondock Bumpers
A.R.E. Cab Height Topper
LUND Sun Visor
RECON Led Lighting (all lights except headlights are LED)
Smoked Taillights lenses
Clear turn and side marker lights and clearance lights
Billet Grill
Stainless Steel Stone Rocker Guards
In bed aluminum truck tool box
This is a used truck that has had a lot of work done. It was my plan to repaint as well as do a customer interior. I bought a newer truck that fits my families needs so here is my pride and joy up for sale!
The truck is being sold as is where it is!!! There is no warranty of any kind!!! The motor has been modified and should never give anyone any problems. Driven responsible it will get you there and back. Hot Rod it and you could tear up parts!!! I built it to pull my Jeep and my wife’s camper, which it does!
I have plenty of pictures as well I can take any picture anyone wants to see, just let me know!!!
I am asking $15,000, which is way, less than I have in the truck to date!
Will consider reasonable offers!!!
Thanks
Chris
316-655-6722