Black Magnum 2.0 assembly

[gwunter]

So did you get a dual ipr block made yet?

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Magnum PD]

The guy I gave the plans to hasn’t got started on it yet. He’s been busy. There are other places that it can be done at.

 

[gwunter]

Don't you have you have your own mill and what not?

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Magnum PD]

Afraid not. I took precision machining during high school but, don’t own one.

 

[Magnum PD]

Really nowhere close to live tune. That I know of.

 

[Magnum PD]

Can having too much hpo be tuned out?

 

[lincolnlocker]

Can having too much hpo be tuned out?

Should be able to. Comanded hpo and actual hpo should go hand in hand but when running big oil then comanded hpo should be lower then actual hpo.

live life full throttle

 

[ja_cain]

Afraid not. I took precision machining during high school but, don’t own one.

Sounds like you need to buy one so you can utilize that education! Use it or loose it. Or, you could always employ Shannon to make you one. Lol!

 

[Magnum PD]

We’re looking for o rings base cutter

 

[uncool]

http://cutters.formrelief.com/viewi...steel-straight-shank-sae-port-contour-cutters

there you go.

They are pricey. I know.

 

[Magnum PD]

Cool. Thanks. Don’t think I can buy them.

 

[uncool]

Ok, here is from MSC,

https://www.mscdirect.com/product/details/00274803

That is the one you need for the IPR.

 

[m j]

pricey for two holes.
I want a remote dual ipr block. how do I get on the list? whats the cost at?

 

[njjeep]

What about just getting weld on aluminum fittings and use JIC fittings

I’m sure if they are tig welded on they will be strong enough


Sent from my iPhone using Tapatalk

 

[Magnum PD]

I modified my IPR a second time, still going down to 3.1% but not throwing a CEL yet. See what happens.

 

[DieselJpower]

Tell your tuner to keep it at 5% or higher and pull some of the icp back from the top end. Mine did goofy $hit when the ipr would go below 5%

 

[Jonnydime]

Ok, here is from MSC,

https://www.mscdirect.com/product/details/00274803

That is the one you need for the IPR.

I do a lot of business with msc so I'm sure I could get that price down if someone really wanted one of these.

 

[Magnum PD]

I might as well share the design I came up with to see if got it right.

 

[Magnum PD]

Is it worth while to try and put on a used 15* pump I got to see if that will bring the duty cycle up? To refresh, dyno proven tunes I had did the same as the G head tunes I got now. Only throws the cel when I’m keeping the pedal steady and not wanting anymore gas.
Still doing a “popping” when I’m in the “All out” tune. That needs to be fixed.

 

[gnxtc2]

The popping could be too high ICP and the poppets don't like it.

Billy T.
[email protected]