How to stop front end death wobble

[florida 6.0]

+1 on the ball joint press, cut off the threads first .

 

[Cory S]

If I go to the parts store what do I ask for to replace the track bar ball joint!?


Sent from ...

 

[Mike@MPD]

I have the ball joint press but its not long enough I guess I have to cut more off. Fking pain in the ass

Sent by my Nexus powered by this (╯°□°)╯

 

[713Diesel]

I have the ball joint press but its not long enough I guess I have to cut more off. Fking pain in the ass

Sent by my Nexus powered by this (╯°□°)╯

This was the sort of battle I was expecting. Hope it ends up working out. I wonder what causes some guys to be so hard to get out and for others it comes right out.

 

[Ipkyss]

This may sound totally stupid. But. Loosen the nut a few threads (don't remove) and go drive down a short bumpy road... Should do the trick.

 

[Mike@MPD]

Done. Still get the death wobble at the end of the track. Must be the radials

Sent by my Nexus powered by this (╯°□°)╯

 

[Dzchey21]

My 195000 mile regcab seams solid even at 130+ mph must be something in the ball.joints or track bar

 

[Mike@MPD]

What tires

Sent by my Nexus powered by this (╯°□°)╯

 

[Ipkyss]

90 percent of the time if its not something loose, its toe or caster. Everyone forgets about caster.

 

[Dzchey21]

Just my proxes mike... Unbalanced to boot.

My truck is lowered with no caster change maybe it's the toe in with the grip from the slicks? Basically fighting traction side to.side

 

[Mike@MPD]

Could be

Sent by my Nexus powered by this (╯°□°)╯