No start after injector/hpop install

[dsberman94]

Thinking he sold the truck so he's putting it back to stock. I could be wrong though.

 

[SDstroker]

I need to update my sig. Yes I sold pretty much all the upgrades on my truck. I put the stock turbo, hpop and injectors back in and in the process of getting it running again.

 

[ghohouston]

Its gotta be easy to lose that little needle

 

[MossBack]

Did you by chance not fully tighten the bolt on the hpop? It is odd but I watched a guy fight low hpo even changed out the lpop and decided to double check the hpop and realized it was loose...


Sent from my iPhone using Tapatalk 2

 

[SDstroker]

Did you by chance not fully tighten the bolt on the hpop? It is odd but I watched a guy fight low hpo even changed out the lpop and decided to double check the hpop and realized it was loose...


Sent from my iPhone using Tapatalk 2

Yup. First thing I thought was the hpop gear was loose. Took the front cover off and checked the 95 ft lbs

Sent from my SCH-I535 using Tapatalk

 

[njjeep]

Maybe you connected the wrong plug to the ipr. If I remember the ipr and ebpv plug are the same.


Sent from my iPhone using Tapatalk

 

[ghohouston]

^ they are indeed, its very possible to mix up the 2, especially if you have the ebpv solenoid unplugged and that sensor is just laying in the valley

 

[SDstroker]

I have ran into that in the past. I taped up the one I dont use lol. IPR should be here thursday. Im going to try that first and see where that gets me.

 

[mandkole]

confirmed that the rails hold oil pressure?

 

[SDstroker]

IPR was the problem. Put a new one in and a couple cranks and fired right up.

Sent from my SCH-I535 using Tapatalk