The Next Chapter

Quigs4u · Jan 24, 2018

Tom@BigTimeKustomz said:
Oh my word....

Order me that!!
My brain says yes’
My pocket says no’
Lol

WhiteMamba_Scorpion · Jan 24, 2018

Sexy AF

Sent from my Galaxy S7

RSK · Jan 25, 2018

looks badass, I test drove one and walked away... so much want but not enough need yet...soon though, interior is badass but i need to build a house first, or at least a garage with a living quarters lol...

TTBOOST · Jan 30, 2018

bigrpowr said:
bumping this up-

did a Midwest add a turbo with a Precision 7685 over my stock 17 Turbo. gonna make some small adjustments today and start driving it . spools great at idle so it should be insanely driveable. stock fuel, stock engine.

http://www.youtube.com/watch?v=9419D-Yx46k

I have the exact same turbo and kit what are you doing for tunning?

bigrpowr · Jan 30, 2018

TTBOOST said:
I have the exact same turbo and kit what are you doing for tunning?

tyrant on EZ Lynk . its working very well .

TTBOOST · Jan 30, 2018

Are they the normal sotf tunes or would they have to write custom tunes? Any other tips on the install been waiting to get enough time to install it on my truck. You had your truck on the dyno yet to get power numbers?

bigrpowr · Jan 30, 2018

TTBOOST said:
Are they the normal sotf tunes or would they have to write custom tunes? Any other tips on the install been waiting to get enough time to install it on my truck. You had your truck on the dyno yet to get power numbers?

do you have our oil pan ?

as for install, its tight but not terrible. just make sure oyu have all the right AN fittings.

as for power, prolly 600-625 on stock fuel, hard to say. and yes its a custom tune at this point. will dyno soon .

TTBOOST · Jan 30, 2018

No I don’t does it have an oil drain fitting welded into it or something?

bigrpowr · Jan 31, 2018

TTBOOST said:
No I don’t does it have an oil drain fitting welded into it or something?

sure does. makes the job a million times easier , and the pan adds 3 quarts and is all billett .

bigrpowr · Feb 6, 2018

well we got it on the dyno, and before the atmo turbo it made exactly 500 at the wheels ( our dyno reads a bit lower than the really friendly ones) and did 579 after the turbo. it's out of fuel, so i'm adding a exergy stroker pump this week to see how it reacts, should be WAY stronger .

HD F250 · Feb 7, 2018

Mikey, I hope you keep doing this one mod at a time so I know when to stop or build a new motor. LOL Looking forward to results. PS...you need to text me so I can give you some money honey.

bigrpowr · Feb 7, 2018

HD F250 said:
Mikey, I hope you keep doing this one mod at a time so I know when to stop or build a new motor. LOL Looking forward to results. PS...you need to text me so I can give you some money honey.

haha i am. doing pump next then dyno, then Fleece 63mm high pressure and dyno again .

HD F250 · Feb 7, 2018

bigrpowr said:
haha i am. doing pump next then dyno, then Fleece 63mm high pressure and dyno again .

I am glad to see you doing it in stages so we can all learn as you go. Thanks for the text, lets talk tomorrow and I will donate to your cause.

bigrpowr · Feb 8, 2018

HD F250 said:
I am glad to see you doing it in stages so we can all learn as you go. Thanks for the text, lets talk tomorrow and I will donate to your cause.

werd.

powr2stroke · Feb 9, 2018

Nice Mikey

Black AOD · Feb 9, 2018

bigrpowr said:
haha i am. doing pump next then dyno, then Fleece 63mm high pressure and dyno again .

I was wondering if you would give their 63mm a try or not.

WhiteMamba_Scorpion · Feb 9, 2018

I'm very curious how that fleece turbo does. Glad to see them releasing some new PSD stuff

Sent from my Galaxy S7

bigrpowr · Feb 18, 2018

we got the Exergy 10mm pump in today , its exactly what this turbo setup needed , low boost fueling substantially improved spoolup , and up top it gets it much harder. i haven't tested it with too much fuel yet, but just testing the tyrant 1900us file , it was night and day from the stock pump. we made 579 with the stock pump ( prolly 620-630 on stock tires) , it will be interesting to see what we can do now. prolly end up with a hole in the block, guess we will start pushing the 17' to see what it will handle .

ckrueg · Feb 18, 2018

bigrpowr said:
we got the Exergy 10mm pump in today , its exactly what this turbo setup needed , low boost fueling substantially improved spoolup , and up top it gets it much harder. i haven't tested it with too much fuel yet, but just testing the tyrant 1900us file , it was night and day from the stock pump. we made 579 with the stock pump ( prolly 620-630 on stock tires) , it will be interesting to see what we can do now. prolly end up with a hole in the block, guess we will start pushing the 17' to see what it will handle .

Do you know if your truck has the updated oem rods?

Sent from my SM-N950U using Tapatalk