Ball joints and wheel hub discussion

CurtisF

New member
Joined
May 23, 2011
Messages
2,347
Reaction score
0
I've had Moogs in my truck for 50K now with 0 issues.... You've just gotta keep them greased.

Yeah I have been pretty religious about that, and still have problems with them. Not really sure why either. I even cut down on my off-roading by quite a bit :naughty:
 

Dmstrucks02

New member
Joined
May 28, 2011
Messages
4,166
Reaction score
0
Location
Pearland, TX
I have moogs also, been in about a year and a half but my tires are starting to wear on the inside so they might be bad again. Ill be keeping an eye on this thread
 

Austin

New member
Joined
May 18, 2011
Messages
418
Reaction score
0
Location
Parker, CO
12,000 miles on the cheapo replacements from rock auto. No issues.

Lol I got all 4 shipped to me for 54 bucks I think.
 

Tom S

Moderator
Joined
May 20, 2011
Messages
3,365
Reaction score
1
Gonna try Raybestos Pro Grade on my Dana 60. They are new name for the Dana/Spicer ones.
 

GreenMachine

Active member
Joined
May 18, 2011
Messages
1,681
Reaction score
0
Location
RI
Pruddddy sure i got a ball joint pop. I am definetly going to be heated since i just typed that the xrf's were dong well after 10k
 

Zaairman

New member
Joined
Sep 1, 2011
Messages
826
Reaction score
0
Location
Wright City, MO
All this talk about wheel bearings, and my left front cheeeeepo from O'Reilly auto starts humming. Ordered a new one (either Raybestos or Timken, I forget) from Rock Auto. :hammer:
 

CurtisF

New member
Joined
May 23, 2011
Messages
2,347
Reaction score
0
Well I decided to go with the Timken wheel hub assembly and the Raybestos/Spicer ball joints. We'll see how long these hold up.
 

Tampa450

New member
Joined
May 28, 2011
Messages
13
Reaction score
0
Location
FL
I just paid a shop $390 to install all 4 new XRF's I had, and do an alignment.

I got the XRF's a year ago for about $100 shipped.

The stock ones lasted me 180k

I put new swaybar links on too, the old ones were shot.

Everything feels pretty good now... Ill see how they hold up...

I havent had any problems with my stock ESOF hubs yet.... I was actually just on Guzzle's website today tho, and decided Im going to service the needle bearings and replace all the seals soon.
http://www.guzzle7pt3.com/nblube.php
 
Last edited:

bigwheel

New member
Joined
Jun 10, 2011
Messages
173
Reaction score
0
Location
Durango, CO
Curtis let me know how that Timken works for you. That is what I put in my truck and seems to be working good so far.
 

Latest posts

Members online

No members online now.
Top