Search results
-
New project
These guys won't give them up. I've got 2 motor pulls going on right now.- DEEZUZ
- Post #30
- Forum: 7.3 Aftermarket
-
F250 rust
I've got $9k wrapped up into a rot box like that right now. But customer wants it done right.. Oil pan, manifolds, complete engine reseal basically. Meanwhile the body is gone...- DEEZUZ
- Post #7
- Forum: 7.3 Tech & FAQ
-
-
04 ex w/low hpop pressure
I've used those but can't say if that's 6.4 -
-
04 ex w/low hpop pressure
J tubes have all o rings installed. They even give you a bonus outlet d ring -
04 ex w/low hpop pressure
Also it's good practice with all of these hpo o rings, once you roll them on, say the top D o ring on the j tube, to let them sit for an hour... Like resealing 7.3 heuis... You must let them sit and relax back into their size. I use STP engine oil additive on all o rings. It's super thick and... -
04 ex w/low hpop pressure
I replace the entire j tube when I do a pump. There are o rings in there and I have never been able to source them -
04 ex w/low hpop pressure
I've never seen them get transferred over. -
alternator plug center wire cut
Yup. Pull the face off, lift the lock and pull the wire out. -
Hazing 7.3
Are you opposed to sending them in to be flow tested?- DEEZUZ
- Post #6
- Forum: 7.3 Aftermarket
-
Hazing 7.3
I wonder if you would catch modified pistons with a compression test. He said he took one and numbers were above 400 psi iirc.- DEEZUZ
- Post #5
- Forum: 7.3 Aftermarket
-
-
glow plug issues
Usually the pins back out of either the green or black plug.. I just spliced in a new set 2 months ago, I'll grab the part number Monday. Remove the connectors, pull the red lock face off and inspect all of the pins, make sure they are locked in -
Injector Balance/Trim Range
Too much variance. How's blowby? Next step is compression test. -
P2291 code
Ehh. I think you woulda be chugging into the fuel station.... Chances are you're experiencing the beginnings of a failure. -
-
450 performance issues
Can we put a clear line on feed side to make sure we're not getting aireted fuel -
-
450 performance issues
Have got to fix that fuel psi issue, have you put eyes on the regulator?
Members online
No members online now.