Search results

  1. 6.0 Tech

    03 6.0 injector replacement

    Piston looks ok. Doesn’t look like anything was bouncing around in the cylinder. I’d throw an injector in it and see how it runs, if it still misses real bad or has a skip while cranking then you’ll need to have a compression test and leak down test done Sent from my iPhone using Tapatalk
  2. 6.0 Tech

    So a bigger TURBO is not always better?

    We’d probably recommend a stage 1 with a .84 for ya. That’s what we include in tow packages with 180/30 injectors, and it runs great Sent from my iPhone using Tapatalk
  3. 6.0 Tech

    What turbo to get with baby swamp injectors?

    We would recommend a stage 1 for ya most likely. With a .84 turbine housing for some better spool up. Sent from my iPhone using Tapatalk
  4. 6.0 Tech

    6.0 Fuel pressure question causing no start?

    Yeah it should be steady. You’re probably gonna have to chase wires. Seen a bunch where the wires were damaged right at the back of the connector. Another common point is where the harness loops down under the air cleaner. You could also possibly have a bent crank tone wheel or one that came...
  5. 6.0 Tech

    2023 HO 6.7 500HP 1200FTLB

    They’ve been running water cooled turbos for quite awhile… And once they switched from the super tiny 11-14 turbo, failure rates went way down. Sent from my iPhone using Tapatalk
  6. 6.0 Tech

    6.0 Fuel pressure question causing no start?

    It is normal for that. The fuel pump only runs for about 30 sec, unless it sees rpm, then it’s commanded on constantly. When you say building oil pressure, is that high or low pressure? And what is the psi if it’s hi pressure? Sent from my iPhone using Tapatalk
  7. 6.0 Tech

    DTA360 Re-Power

    Or carry a can of ether with you… Sent from my iPhone using Tapatalk
  8. 6.0 Tech

    7.3 crank no start no smoke

    What is icp, rpm, fuel pressure, and voltage while cranking? Sent from my iPhone using Tapatalk
  9. 6.0 Tech

    6.4 powerstroke turbo

    Yup that’s it. Sent from my iPhone using Tapatalk
  10. 6.0 Tech

    6.4 powerstroke turbo

    We (KC turbos) sell drop in sets. Charlie had a really good write up somewhere about some of the issues we had ran into while testing turbos, and some of the restrictions we were also running into. We were actually finding that the turbine side of the low pressure was a restriction, and I...
  11. 6.0 Tech

    03 6.0 injector replacement

    Gotcha, thought alliant was only a year Sent from my iPhone using Tapatalk
  12. 6.0 Tech

    03 6.0 injector replacement

    Motor raft has a better warranty, so if it’s around the same price I’d go that route Sent from my iPhone using Tapatalk
  13. 6.0 Tech

    Coolant in valley, leak.

    What year truck is it? The 11-14 the coolant fitting on the top of the turbo, towards the drivers side is very prone to leaking. Also have seen turbo to block gaskets leak, although much less than the fitting. If it is the fitting do the tube at the same time. Other than that the best bet would...
  14. 6.0 Tech

    6.7 extremely long crank

    How much have you driven it? Sometimes they need to bleed all the air out which takes some driving Sent from my iPhone using Tapatalk
  15. 6.0 Tech

    4r100

    The converter needs pressure to unlock the clutch, so if pressure is low, the clutch will be locked on. It’s backwards from what you’re thinking Sent from my iPhone using Tapatalk
  16. 6.0 Tech

    4r100

    Stupid question, but is the fluid full? Pressure/fluid is pulled to lock the converter. Sent from my iPhone using Tapatalk
  17. 6.0 Tech

    After market replacement fuel tanks

    Recalibrating will affect the distance to empty reading. Other than that, not really needed. Fuel gauge will still read correctly, just not dte without calibration Sent from my iPhone using Tapatalk
  18. 6.0 Tech

    After market replacement fuel tanks

    I believe all the titans I’ve done have had a bolted ring for the sender. I’ve put sumps in titans, never done one on an s&b though. Don’t remember seeing a spot for one though on them… Sent from my iPhone using Tapatalk
  19. 6.0 Tech

    After market replacement fuel tanks

    I have done an s&b or 2, and a couple of titans. Had an issue with an s&b in our old shop tow vehicle, in that it would spit back when filling right before the pump clicked off. Had the vent run properly, so that wasn’t the issue. Titans never had a problem with that. That truck actually had a...
  20. 6.0 Tech

    6.0 won't start

    Any codes? What does the computer read for rpm while cranking? FICM sync, sync, injector pulse width? Sent from my iPhone using Tapatalk

Random media

bryanstruck
81E764AB-7A85-45AB-9BB5-CE94D0D83F9A
Dozer_s
thumb_IMG_1330_1024
Ahead of its time
97psd2
13_icon_sideview
P1060047
photo_9
maple_grove_014
2012-01-14_10-38-11_846
IMG_0251

Latest posts

Members online

No members online now.
Total: 281 (members: 0, guests: 281)
Top