Search results

I have decided to sell my project truck, I am working 2 jobs and just don't have time to work on it . I had big plans for this thing but don't want to see it sitting in the weeds rotting away any more. I was daily driving it until about 2 years ago when it started putting water in the oil. ( I...

should have almost everything to do a auto swap on 4x4 7.3 truck except the rear driveshaft. transmission needs rebuilt wasn't slipping but shifted funny pretty sure it needed the solenoid pack this will included wiring, pcm, front driveshaft steering column, pedals, cross member exc.$600

so I have one that I have never seen and unfortunately it on my own truck...:confused: -loosing coolant -heavy white smoke (smells like coolant) and hydro locking (Both of these are intermintant and on start up only} -milky oil so my initial thought is a head gasket but could an injector cup...

so I am fixing up a 03 f250 for my son and was wondering if anyone has lowered the rear of one by just yanking out the bottom leaf. and did you have to adjust the pinion angle after? I think its only going to drop it about an inch. it looks to me like it is just an overload. we are going to...

I am in need of the driverside rear door latch for a 97Crew cab f350. the last time I talked to ford about it they said it was discontinued any body parting out a crew cab?

I have a 80/88 BFH turbo sale. for those that don't know this is a s400 turbo with a H2e exhaust housing so it will fit on the hypermax mounting kit. turbo also comes with a 66mm compressor housing to make it legal for 2.6 pulling class. $900 OBO

well my dad has been wanting to fix up a old car or truck for a couple years but just hadn't found the right thing yet. but the other day he ran across a 55 chevy cameo pickup that had been sitting in a guys garage for almost 30 years. he said it was perfect timing because next week I close on a...

well as many of you may know I blew a head gasket at the end of last year on my pulling truck. As much as I hated to I decided to part the truck out with plans of building a mech 7.3, 3.0 puller instead of staying with a 2.6 puller. it looks like my plans for a 3.0 truck may be delayed a...

well I have had my pulling truck for sale because I want to start putting together a mechanical 7.3 for the 3.0 class. anyway I wanted to keep it in one piece incase It didn't sell I was going to pull it again this year. However my wife and I are in the process of buying a house that needs some...

well I am thinking about sellling my pulling truck. I would like to go to an open driveline, mechanical 7.3, 3.0 pulling truck and it just seems to make more sense to sell this one and start off with a different truck. it currently has a blown head gasket but you can hear it run. specs: truck...

I am running a bts dual HPOP setup in my puller with a stock 17degree pump on the bottom and a dt466 pump on top. after putting my injectors back in I was running it to get all the air out of the system and blew a high pressure line after reving it up a little bit. after replacing the line...

thanks again to the guys at swamps for all the hospitality last week. it was a long 3 days (5 by the time I drove there and back) but well worth it. you have a great group of guys working there I dont think you can get better service anywhere !

so I went to swamps last week with my engine with hopes of makeing more power at higher RPM's It took three long days but I think we were pretty successfull:ford: that was not the highest hp pull we made but definatly my favorite one. 700+hp from 3000 rpm to 4400 rpm with peak hp...

wasn't sure where to put this but I am parting out my wrecked 97 f350. let me know what you are looking for and I'll see if I am keeping the base engine but will sell the injectors, turbo hpop, fuel bowl, exc. I am also keeping the 5 speed transmission and stuff to swap in my new truck...

I am parting out my wrecked 97 f350 and have a good dana 60 front axel for sale with 4.10 gears and everything you need to install it $1000 also have front and rear springs and block if you want to make your truck a full f350 Thanks

sell the my injectors out of my old tow rig that I wrecked they are just under 2 years old and have about 10,000 mi on them. they ran perfict. I will warrenty them for 30 day after you get them installed. $650 plus your old injectors or $800 with out cores. I also have a 6 position chip...

I know there has been alot of discusion about the 3126 cat injectors in the past and dont remember much about them other than they wern't any better than the IH ones. But the other day I replaced a set of injector cups on a cat C7 at work. It was the first time I had been into ones of these...

my new truck (97 f350 cc lb with an automatic) wont idle smooth it surges from 700 rmp down to 500. if you dont give it a little gas when you put it in gear or come to a stop it will die and dies sometime sitting still. theguy I bought the truck from swares it is something in the transmission...

well as some of you may know last month I totaled my old tow rig after hitting black ice on a bridge on my way to work. luckaly I am still here but I did break 3 vertibrea in my back. long story short I'm on light duty for a while but should make a full recovery. my old truck was a 97 f350...

could I please get someone to fix my user name it was should be pontiacross I got happly with the p key lol Thanks Ross